Effect of Solution Heat Treatment Time on a Rheocast Al-Zn-Mg-Cu Alloy

被引：10
|
作者：
Mazibuko, Nonjabuliso E. [1 ]
Curle, Ulyate A. [1 ]
机构：
[1] CSIR, ZA-0001 Pretoria, South Africa
来源：
LIGHT METALS TECHNOLOGY V | 2011年 / 690卷
关键词：
CSIR-RCS; eutectic phase; intermetallic phases; hardness; EVOLUTION;
D O I：
10.4028/www.scientific.net/MSF.690.343
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
During rheo-high pressure die casting (R-HPDC) of Al-Zn-Mg-Cu alloys a coarse eutectic phase is formed. This eutectic phase is difficult to take into solution because of its size and it would require longer solution heat treatment times. The objective of this work was to determine the time for sufficient dissolution of the eutectic phase in this Al-Zn-Mg-Cu alloy. Solution heat treatment was carried out at 473 degrees C for various time periods and the samples were quenched in water. The samples were then artificially aged at 120 degrees C for 24 hrs. A component of the eutectic was observed to have dissolved and another component transformed to new intermetallic phases for all solution heat treatment times at 473 degrees C.
引用
收藏
页码：343 / 346
页数：4
相关论文
共 50 条
  • [31] Effect of Exposure Time on Stress Corrosion Cracking Susceptibility of Al-Zn-Mg-Cu Alloys
    An, Jaehyun
    Lee, Minsik
    Euh, Kwang Jun
    Jung, Im Doo
    Kim, Sangshik
    Sung, Hyokyung
    SCIENCE OF ADVANCED MATERIALS, 2020, 12 (11) : 1666 - 1672
  • [32] Effect of intermittent non-isothermal aging on the microstructure and properties of Al-Zn-Mg-Cu alloy
    Wang, Yuezhu
    Shi, Ling
    Su, Ruiming
    Liu, Tongyu
    Li, Guanglong
    MATERIALS CHEMISTRY AND PHYSICS, 2024, 328
  • [33] Effect of pretreatment on microstructural stability and mechanical property in a spray formed Al-Zn-Mg-Cu alloy
    Wang, Zhiping
    Wang, Mingliang
    Li, Yugang
    Xiao, Hongyu
    Chen, Han
    Geng, Jiwei
    Li, Xianfeng
    Chen, Dong
    Wang, Haowei
    MATERIALS & DESIGN, 2021, 203
  • [34] Investigation of RRA Heat Treatment Effects on Al - Zn - Mg - Cu Alloy Crystallography
    Altuntas, Gozde
    Bostan, Bulent
    JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI, 2022, 25 (02): : 871 - 877
  • [35] Effect of cumulative plastic deformation on microstructure and strengthening mechanism of extruded Al-Zn-Mg-Cu alloy
    Liu, Linlin
    Zhao, Guoqun
    Zhao, Xingting
    Li, Yexu
    Lv, Zhengfeng
    VACUUM, 2025, 232
  • [36] Precipitation behavior and properties of a new high strength Al-Zn-Mg-Cu alloy
    Zang Jin-xin
    Zhang Kun
    Dai Sheng-long
    TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2012, 22 (11) : 2638 - 2644
  • [37] Precipitation of a new platelet phase during the quenching of an Al-Zn-Mg-Cu alloy
    Zhang, Yong
    Weyland, Matthew
    Milkereit, Benjamin
    Reich, Michael
    Rometsch, Paul A.
    SCIENTIFIC REPORTS, 2016, 6
  • [38] Microstructure and Mechanical Properties of a Friction Stir Processed Al-Zn-Mg-Cu Alloy
    Vargas, M.
    Lathabai, S.
    PRICM 7, PTS 1-3, 2010, 654-656 : 1428 - 1431
  • [39] Simulation of dynamic recrystallization for an Al-Zn-Mg-Cu alloy using cellular automaton
    Zhang, Jie
    Li, Zhihui
    Wen, Kai
    Huang, Shuhui
    Li, Xiwu
    Yan, Hongwei
    Yan, Lizhen
    Liu, Hongwei
    Zhang, Yongan
    Xiong, Baiqing
    PROGRESS IN NATURAL SCIENCE-MATERIALS INTERNATIONAL, 2019, 29 (04) : 477 - 484
  • [40] An in-situ study on the dissolution of intermetallic compounds in the Al-Zn-Mg-Cu alloy
    Li, Ya
    Deng, Yunlai
    Fan, Shitong
    Guo, Xiaobin
    Jiang, Keda
    Zhang, Zhen
    Sun, Lin
    JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 829
12345