Effect of Solution Heat Treatment Time on a Rheocast Al-Zn-Mg-Cu Alloy

被引：10

作者：

Mazibuko, Nonjabuliso E. ^{[1
]}

Curle, Ulyate A. ^{[1
]}

机构：

[1] CSIR, ZA-0001 Pretoria, South Africa

来源：

LIGHT METALS TECHNOLOGY V | 2011年 / 690卷

关键词：

CSIR-RCS; eutectic phase; intermetallic phases; hardness; EVOLUTION;

D O I：

10.4028/www.scientific.net/MSF.690.343

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

During rheo-high pressure die casting (R-HPDC) of Al-Zn-Mg-Cu alloys a coarse eutectic phase is formed. This eutectic phase is difficult to take into solution because of its size and it would require longer solution heat treatment times. The objective of this work was to determine the time for sufficient dissolution of the eutectic phase in this Al-Zn-Mg-Cu alloy. Solution heat treatment was carried out at 473 degrees C for various time periods and the samples were quenched in water. The samples were then artificially aged at 120 degrees C for 24 hrs. A component of the eutectic was observed to have dissolved and another component transformed to new intermetallic phases for all solution heat treatment times at 473 degrees C.

引用

页码：343 / 346

页数：4

共 50 条

[1] Effect of heat treatment on microstructure and mechanical properties of a novel Al-Zn-Mg-Cu alloy
Yang, Yan-mei
Tang, Xin-chen
Li, Ye-fei
Fang, Xue-wei
Yi, Da-wei
Zhang, Zhi-yun
Zheng, Qiao-ling
Wang, Zhi-xi
Zhang, Guo-yu
Zhang, Su
Cheng, Hao
He, Yang
Liu, Yi-bo
Wu, Zi-han
Chen, Ya-nan
Gao, Yi-min
CHINA FOUNDRY, 2025,
[2] Effect of heat treatment on microstructure, hardening and plasticity of a commercial Al-Zn-Mg-Cu alloy
Chemingui, Mahmoud
Benkhenafou, Fethi
Khitouni, Mohamed
Jozwiak, Karol
Mesmacque, Gerard
Shi, MingQuan
Douadji, Lyes
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2018, 109 (12) : 1113 - 1121
[3] Effects of Heat Treatment on Microstructure and Mechanical Properties of an ECAPed Al-Zn-Mg-Cu Alloy
Li, Jinghui
Li, Fuguo
Ma, Xinkai
Li, Jiang
Liang, Shan
Zhang, Long
ADVANCED ENGINEERING MATERIALS, 2018, 20 (09)
[4] Precipitation strengthening in naturally aged Al-Zn-Mg-Cu alloy
Lee, Sang-Hwa
Jung, Jae-Gil
Baik, Sung-Il
Seidman, David N.
Kim, Min-Seok
Lee, Young-Kook
Euh, Kwangjun
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 803
[5] Effect of Yb Microalloying on Microstructure and Properties of Al-Zn-Mg-Cu Alloy
Xu Yongxiang
Zhu Mengzhen
Fang Huachan
Zhang Zhuo
Duan Zhiying
Sun Zhen
RARE METAL MATERIALS AND ENGINEERING, 2023, 52 (10) : 3556 - 3562
[6] Effect of Pre-Deformation on Precipitation in Al-Zn-Mg-Cu Alloy
Rhee, Yujin
Thronsen, Elisabeth
Ryggetangen, Oskar
Marioara, Calin D.
Holmestad, Randi
Kobayashi, Equo
METALS AND MATERIALS INTERNATIONAL, 2024, 30 (12) : 3294 - 3310
[7] Understanding the effect of deformation combined with heat treatment on age hardening of Al-Zn-Mg-Cu alloy AA7075
Ma, Z.
Robson, J. D.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2023, 878
[8] Effect of stress-aging treatment on the mechanical and corrosion properties of Al-Zn-Mg-Cu alloy
Zhang, Zhaogang
Ma, Xinwu
Zhang, Cunsheng
Chu, Guannan
Meng, Zijie
Zhao, Guoqun
Chen, Liang
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 838
[9] Transformation and dissolution of second phases during solution treatment of an Al-Zn-Mg-Cu alloy containing high zinc
Wen, Kai
Xiong, Bai-Qing
Fan, Yun-Qiang
Zhang, Yong-An
Li, Zhi-Hui
Li, Xi-Wu
Wang, Feng
Liu, Hong-Wei
RARE METALS, 2018, 37 (05) : 376 - 380
[10] Effect of various aging treatment on thermal stability of a novel Al-Zn-Mg-Cu alloy for oil drilling
Zhao, Juangang
Liu, Zhiyi
Bai, Song
Huang, Tiantian
Wang, Jian
Xie, Haoyu
Zeng, Diping
Luo, Lei
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2021, 803

← 1 2 3 4 5 →