Synthesis and Characterization of Polyimides Derived from Novel 1,3-Bis(4-aminophenoxy)Benzene

被引：3

作者：

Chao, Min ^{[1
]}

Kou, Kai Chang ^{[1
]}

Wang, Zhi Chao ^{[1
]}

Wu, Guang Lei ^{[1
]}

Zhang, Dong Na ^{[1
]}

Zhang, Jiao Qiang ^{[1
]}

机构：

[1] NW Polytech Univ, Sch Sci, Xian 710129, Peoples R China

来源：

ADVANCES IN MECHANICAL DESIGN, PTS 1 AND 2 | 2011年 / 199-200卷

关键词：

Diamine; High Purity; Imidization; Polyimides; Thermal Stability; A-BPDA; DIANHYDRIDE; MEMBRANE; PROPERTY; FILMS;

D O I：

10.4028/www.scientific.net/AMR.199-200.13

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A novel aromatic ether diamine 1,3-bis(4-aminophenoxy)benzene (TPER) was synthesized. Four kinds of polyimides were prepared with obtained TPER, 4,4'-diaminodiphenyl(ODA), pyromellitic dianhydride (PMDA) and end capped with phthalic anhydride(PA). The imidization process was solution imidization followed by solid-phase thermal imidization. The results of DSC, (1)H-NMR and FTIR analysis showed that high purity TPER had been successfully synthesized. FTIR spectras of polyimides indicated the imidization process could reduce the final imidization temperature. The inherent viscosities([eta]) showed molecular weight could be controlled via the introduction of flexible diamine and end capping agent. And all polyimides exhibited excellent thermal stability.

引用

页码：13 / 18

页数：6

共 17 条

[1] Adrova N.A., 1970, Polyimides, A New Class of Thermally Stable Polymers
[2] SYNTHESIS, CHARACTERIZATION AND PROPERTIES OF POLYIMIDES FROM 3,3',4,4'-BENZOPHENONETETRACARBOXYLIC DIANHYDRIDE AND IMIDAZOLE-BLOCKED 2,5-BIS[(N-ALKYLOXY)METHYL]-1,4-BENZENEDIISOCYANATES
JUNG, JC
PARK, SB
[J]. POLYMER BULLETIN, 1995, 35 (04) : 423 - 430
[3] Preparation of novel polyimides with high thermal stability of dipole alignment for electro-optic applications
Kim, Jin-Hyang
Jang, Han-Na
Lee, Ju-Yeon
[J]. POLYMER BULLETIN, 2008, 60 (2-3) : 181 - 189
[4] KUMAR D, 1992, POLYM ADVAN TECHNOL, V3, P1
[5] Melt-processable thermosetting polyimide: Synthesis, characterization, fusibility, and property
Kuroki, T
Shibuya, A
Toriida, M
Tamai, S
[J]. JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, 2004, 42 (10) : 2395 - 2404
[6] Synthesis and characterization of polyimides from 1,4-bis[4-(n-alkyloxy)phenyloxy]pyromellitic dianhydrides and 4,4′-oxydianiline
Lee, KH
Jung, JC
[J]. POLYMER BULLETIN, 1998, 40 (4-5) : 407 - 414
[7] NEW HIGH-PERFORMANCE THERMOSETTING POLYMER MATRIX MATERIAL SYSTEMS
MEYER, GW
PAK, SJ
LEE, YJ
MCGRATH, JE
[J]. POLYMER, 1995, 36 (11) : 2303 - 2309
[8] Preparation and characterization of a polyimide membrane
Niyogi, S
Adhikari, B
[J]. EUROPEAN POLYMER JOURNAL, 2002, 38 (06) : 1237 - 1243
[9] Membrane characterisation by SEM, TEM and ESEM: The implications of dry and wetted microstructure on mass transfer through integrally skinned polyimide nanofiltration membranes
Patterson, Darrell A.
Havill, Alice
Costello, Sarah
See-Toh, Yoong Hsiang
Livingston, Andrew G.
Turner, Adrian
[J]. SEPARATION AND PURIFICATION TECHNOLOGY, 2009, 66 (01) : 90 - 97
[10] Humidity-dependent mechanical properties of polyimide films and their use for IC-compatible humidity sensors
Sager, K
Schroth, A
Nakladal, A
Gerlach, G
[J]. SENSORS AND ACTUATORS A-PHYSICAL, 1996, 53 (1-3) : 330 - 334

← 1 2 →