Finite element analysis of steel-concrete-steel sandwich beams

被引：31

作者：

Foundoukos, N. ^{[1
]}

Chapman, J. C. ^{[1
]}

机构：

[1] Univ London Imperial Coll Sci Technol & Med, Dept Civil & Environm Engn, London SW7 2AZ, England

来源：

JOURNAL OF CONSTRUCTIONAL STEEL RESEARCH | 2008年 / 64卷 / 09期

基金：

英国工程与自然科学研究理事会;

关键词：

sandwich construction; Bi-steel beams; finite elements; transverse shear; parametric study; uniformly distributed load;

D O I：

10.1016/j.jcsr.2007.10.011

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

The static behaviour of Bi-Steel beams was simulated using a finite element model. The model was compared to test results showing good agreement. It was then used in parametric studies of transverse shear capacity and uniformly distributed load cases of Bi-Steel beams. It was possible to isolate the transverse shear failure mode and prevent other failure modes from using the FE model. This enabled the comparison and verification of the proposed design equations for transverse shear. Based on parametric studies, modifications to the design method were also proposed to accommodate udl cases. (c) 2007 Elsevier Ltd. All rights reserved.

引用

页码：947 / 961

页数：15

共 50 条

[31] A finite element model for the analysis of viscoelastic sandwich structures [J].

Moita, J. S. ;

Araujo, A. L. ;

Martins, P. ;

Mota Soares, C. M. ;

Mota Soares, C. A. .

COMPUTERS & STRUCTURES, 2011, 89 (21-22) :1874-1881

[32] NUMERICAL ANALYSIS OF VOIDED WIDE REINFORCED CONCRETE BEAMS USING STEEL PLATES FOR SHEAR REINFORCEMENT [J].

Ameer, Iman Majid Abdul ;

Naji, Abass Hatif ;

Ibrahim, Amer Mohammed .

JOURNAL OF ENGINEERING SCIENCE AND TECHNOLOGY, 2021, 16 (05) :4352-4368

[33] Crystal plasticity finite element analysis of ferritic stainless steel for sheet formability prediction [J].

Kim, Ji Hoon ;

Lee, Myoung-Gyu ;

Kang, Joo-Hee ;

Oh, Chang-Seok ;

Barlat, Frederic .

INTERNATIONAL JOURNAL OF PLASTICITY, 2017, 93 :26-45

[34] Finite Element Analysis on Seismic Behaviour of Novel Joint in Prefabricated Modular Steel Building [J].

Kashan Khan ;

Jia-Bao Yan .

International Journal of Steel Structures, 2020, 20 :752-765

[35] Finite Element Analysis on Seismic Behaviour of Novel Joint in Prefabricated Modular Steel Building [J].

Khan, Kashan ;

Yan, Jia-Bao .

INTERNATIONAL JOURNAL OF STEEL STRUCTURES, 2020, 20 (03) :752-765

[36] Finite element analysis on tensile stiffness of cold-formed steel bolted connections [J].

Cheng, Bo ;

Wu, Zhenyu .

Open Civil Engineering Journal, 2015, 9 (01) :724-735

[37] Investigation of the Influence of Design Parameters on the Strength of Steel-Concrete Composite Shear Walls by Finite Element Simulations [J].

Javadi, Masoud ;

Saavedra Flores, Erick I. ;

Yanez, Sergio J. ;

Avudaiappan, Siva ;

Pina, Juan C. ;

Guzman, Carlos F. .

BUILDINGS, 2023, 13 (01)

[38] Parametric Study on Shear Performance for Steel Fiber Reinforced Concrete Beams [J].

Seo, Junwon ;

Lee, Jaeha ;

Lopez, Maria M. .

ADVANCES IN STRUCTURAL ENGINEERING, 2015, 18 (07) :1115-1127

[39] Finite element simulation of the steel plates hot rolling process [J].

Cavaliere, MA ;

Goldschmit, MB ;

Dvorkin, EN .

INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 2001, 52 (12) :1411-1430

[40] Finite Element Modelling of Cold Formed Stainless Steel Columns [J].

Macdonald, M. ;

Rhodes, J. .

ACTA POLYTECHNICA, 2005, 45 (03) :92-98

← 1 2 3 4 5 →