Mineral Fouling Control by Underwater Plasma Discharge in a Heat Exchanger

被引：1

作者：

Yang, Yong ^{[1
]}

Kim, Hyoungsup ^{[1
]}

Fridman, Alexander ^{[1
]}

Cho, Young I. ^{[1
]}

机构：

[1] Drexel Univ, Dept Mech Engn & Mech, Philadelphia, PA 19104 USA

来源：

JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME | 2011年 / 133卷 / 05期

关键词：

physical water treatment; plasma; heat exchanger; mineral fouling;

D O I：

10.1115/1.4003116

中图分类号：

O414.1 [热力学];

学科分类号：

摘要：

The excessive mineral contents in water circulation systems could cause severe fouling in heat transfer equipment. The present study investigated the effect of underwater pulsed spark discharges on the mitigation of mineral fouling in a concentric counterflow heat exchanger. Artificial hard water with calcium carbonate hardness of 250 mg/L was used with velocity ranging from 0.1 m/s to 0.5 m/s and zero blowdown. Fouling resistances decreased by 50-72% for the plasma treated cases compared with the values for no-treatment cases, indicating that the pulsed spark discharge could significantly mitigate the mineral fouling on the heat exchanger surface. [DOI: 10.1115/1.4003116]

引用

页数：4

共 50 条

[31] Fouling of CS heat exchanger from MIC?
Krisher, AS
MATERIALS PERFORMANCE, 1999, 38 (06) : 9 - 9
[32] A review of milk fouling on heat exchanger surfaces
Sadeghinezhad, Emad
Kazi, Salim Newaz
Badarudin, Ahmad
Zubair, Mohd Nashrul M.
Dehkordi, Babak Lotfizadeh
Oon, Cheen Sean
REVIEWS IN CHEMICAL ENGINEERING, 2013, 29 (03) : 169 - 188
[33] Influence of surface properties on heat exchanger fouling
Zhao, Q
Müller-Steinhagen, H
PROCEEDINGS OF AN INTERNATIONAL CONFERENCE ON MITIGATION OF HEAT EXCHANGER FOULING AND ITS ECONOMIC AND ENVIRONMENTAL IMPLICATIONS, 2001, : 217 - 228
[34] Heat Exchanger Fouling and Cleaning-2011
Mueller-Steinhagen, H.
Malayeri, M. R.
Watkinson, A. P.
HEAT TRANSFER ENGINEERING, 2013, 34 (8-9) : 653 - 654
[35] The fouling in the tubular heat exchanger of Algiers refinery
Harche, Rima
Mouheb, Abdelkader
Absi, Rafik
HEAT AND MASS TRANSFER, 2016, 52 (05) : 947 - 956
[36] Optimize heat exchanger operations by minimizing fouling
Bailey, K
HYDROCARBON PROCESSING, 1999, 78 (06): : 113 - +
[37] Development of a Dynamic Fouling Model for a Heat Exchanger
Zahid, Khayyam
Patel, Rajnikant
Mujtaba, Iqbal
PRES2016: 19TH INTERNATIONAL CONFERENCE ON PROCESS INTEGRATION, MODELING AND OPTIMIZATION FOR ENERGY SAVINGS AND POLLUTION REDUCTION, 2016, 52 : 1135 - 1140
[38] Heat Exchanger Fouling: Mitigation and Cleaning Strategies
Mueller-Steinhagen, H.
Malayeri, M. R.
Watkinson, A. P.
HEAT TRANSFER ENGINEERING, 2011, 32 (3-4) : 189 - 196
[39] MINIMIZING FOULING IN HEAT-EXCHANGER DESIGN
SANDU, C
LUND, D
BIOTECHNOLOGY PROGRESS, 1985, 1 (01) : 10 - 17
[40] Fouling Problem and Prevention of Plate Heat Exchanger
Xu, Yao
MATERIALS SCIENCE, ENERGY TECHNOLOGY AND POWER ENGINEERING III (MEP 2019), 2019, 2154

← 1 2 3 4 5 →