Joining mechanism in pinless FSSW of aluminum-steel with or without Zn and brass interlayers

被引：24
作者：
Alaeibehmand, Saleh [1 ]
Ranjbarnodeh, Eslam [1 ]
Mirsalehi, Seyyed Ehsan [1 ]
机构：
[1] Amirkabir Univ Technol AUT, Dept Mat & Met Engn, Hafez Ave, Tehran, Iran
来源：
MATERIALS CHARACTERIZATION | 2021年 / 180卷
关键词：
Pinless friction stir spot welding; Al-steel dissimilar joint; Interlayer; Lap-shear test; Intermetallic; WELDING PARAMETERS; WELDED-JOINTS; STIR; AL; ALLOY; BEHAVIOR; MICROSTRUCTURE;
D O I：
10.1016/j.matchar.2021.111400
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In this paper, a pinless tungsten tool is used to friction stir spot welding of AA6061 aluminum alloy and DP600 dual-phase steel from the steel side. Three different joint interfaces were formed by inserting Zn foil interlayer, brass coating of steel, and without any interlayer at the AA6061/DP600 lapped interface. Maximum lap-shear tensile load is related to joint without any interlayer at double pass welding condition. The failure load in this condition is 6.2 kN. Three different joint mechanisms recognized and studied: (i) Fe/Al intermetallic layer in joints without an interlayer, (ii) intermetallic + Al/Zn dissolved zone in joints with Zn foil, and (ii) remained brass interlayer + Al/Cu/Zn dissolved zone in joints with brass coated steel. Microstructure features, fracture surface morphology, and phases were characterized with optical microscopy, scanning electron microscopy equipped with energy-dispersive X-ray spectroscopy (EDS) analysis system, and X-ray diffraction methods.
引用
收藏
页数：10
相关论文
共 46 条
[1]   Investigation of Fe-rich fragments in aluminum-steel friction stir-welds via simultaneous Transmission Kikuchi Diffraction and EDS [J].
Abbasi, Majid ;
Dehghani, Morteza ;
Guim, Hwan-Uk ;
Kim, Dong-Ik .
ACTA MATERIALIA, 2016, 117 :262-269
[2]   Thermo-mechanical finite element model of friction stir welding of dissimilar alloys [J].
Al-Badour, Fadi ;
Merah, Nesar ;
Shuaib, Abdelrahman ;
Bazoune, Abdelaziz .
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2014, 72 (5-8) :607-617
[3]   Through-thickness friction stir processing; a low-cost technique for fusion welds repair and modification in AA6061 alloy [J].
Aliakbari, Saeed ;
Ketabchi, Mostafa ;
Mirsalehi, Seyyed Ehsan .
JOURNAL OF MANUFACTURING PROCESSES, 2018, 35 :226-232
[4]   Friction stir spot welding of aluminium to steel by rotating tool without probe [J].
Aota K. ;
Takahashi M. ;
Ikeuchi K. .
Welding International, 2010, 24 (02) :96-104
[5]   Effect of TiO2 nanoparticles addition on microstructure and mechanical properties of dissimilar friction stir welded AA6063-T4 aluminum alloy and AZ31B-O magnesium alloy [J].
Asl, Nima Sharifi ;
Mirsalehi, Seyyed Ehsan ;
Dehghani, Kamran .
JOURNAL OF MANUFACTURING PROCESSES, 2019, 38 :338-354
[6]   Single- and double-pass FSW lap joining of AA5456 sheets with different thicknesses [J].
Behmand, S. A. ;
Mirsalehi, S. E. ;
Omidvar, H. ;
Safarkhanian, M. A. .
MATERIALS SCIENCE AND TECHNOLOGY, 2016, 32 (05) :438-445
[7]   Filling exit holes of friction stir welding lap joints using consumable pin tools [J].
Behmand, S. A. ;
Mirsalehi, S. E. ;
Omidvar, H. ;
Safarkhanian, M. A. .
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2015, 20 (04) :330-336
[8]   Interfacial and Mechanical Behavior of AA5456 Filling Friction-Stir-Welded Lap Joints Using Similar and Dissimilar Pins [J].
Behmand, Saleh Alaei ;
Mirsalehi, Seyyed Ehsan ;
Omidvar, Hamid ;
Safarkhanian, Mohammad Ali .
METALLURGICAL AND MATERIALS TRANSACTIONS B-PROCESS METALLURGY AND MATERIALS PROCESSING SCIENCE, 2016, 47 (05) :2938-2945
[9]   Effect of welding parameters on lap shear tensile properties of dissimilar friction stir spot welded AA 5754-H22/2024-T3 joints [J].
Bozkurt, Y. ;
Salman, S. ;
Cam, G. .
SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, 2013, 18 (04) :337-345
[10]  
Bozzi S, 2010, MAT SCI ENG A-STRUCT, V527-16/17, P4505, DOI DOI 10.1016/j.msea.2010.03.097
12345