3D registration based on the direction sensor measurements

3D registration is a very active topic, spanning research areas such as computational geometry, computer graphics and pattern recognition. It aims to solve spatial transformation that aligns two point clouds. In this work we propose the use of a single direction sensor, such as an accelerometer or a magnetometer, commonly available on contemporary mobile platforms, such as tablets and smartphones. Both sensors have been heavily investigated earlier, but only for joint use with other sensors, such as gyroscopes and GPS. We show a time-efficient and accurate 3D registration method that takes advantage of only either an accelerometer or a magnetometer. We demonstrate a 3D reconstruction of individual point clouds and the proposed 3D registration method on a tablet equipped with an accelerometer or a magnetometer. However, we point out that the proposed method is not restricted to mobile platforms. Indeed, it can easily be applied in any 3D measurement system that is upgradable with some ubiquitous direction sensor, for example by adding a smartphone equipped with either an accelerometer or a magnetometer. We compare the proposed method against several state-of-the-art methods implemented in the open source Point Cloud Library (PCL). The proposed method outperforms the PCL methods tested, both in terms of processing time and accuracy. (C) 2018 Elsevier Ltd. All rights reserved.