Microorganisms in diesel and in biodiesel fuels

被引:0
|
作者
Klofutar, Bostjan [1 ]
Golob, Janvit [2 ]
机构
[1] Agcy Repub Slovenia Compulsory Oil Stocks, Ljubljana 1000, Slovenia
[2] Univ Ljubljana, Fac Chem & Chem Technol, Ljubljana 1000, Slovenia
关键词
microorganisms in oil; hydrocarbon fuels; biodiesel; biocides; microbial corrosion;
D O I
暂无
中图分类号
O6 [化学];
学科分类号
0703 ;
摘要
The presence of microorganisms in tanks used for petroleum products iscaused by contamination, i.e. fouling of petroleum products when replenishing stocks by adding new fuel. The presence and growth of microorganisms results in the creation of sediments, sludge and slime, and consequently leads to deterioration of the quality of fuel and damage to the tank farm fuel-handling facilities such as the storage tanks, pipelines, pumps, filters and valves, and indirectly also causes difficulties when using contaminated fuel. Of the basic categories of fuels comprising automotive gasoline, middle distillates (diesel and domestic heating oil) and aviation fuel JET-A1, the group containing middle distillates is the most sensitive to the growth of microorganisms. Specifically with the introduction of biodiesel blended fuel, the exposure of this group to microorganisms has increased. In this study analytical results are presented for cases where there is a possibility for growth of microorganisms in unblended diesel fuels and in the combination with biodiesel, both in the medium free of water and in the medium containing water, as well as in the presence and absence of biocides in the samples. The results obtained indicate that the most significant criterion for the prevention of microorganisms in fuels is the absence of water. In the case when microorganisms have started to grow, adding a biocide can inhibit their growth.
引用
收藏
页码:744 / 748
页数:5
相关论文
共 50 条
  • [21] Advances in emission characteristics of diesel engines using different biodiesel fuels
    He, Bang-Quan
    RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 2016, 60 : 570 - 586
  • [22] Corrosion of The Metal Parts of Diesel Engines In Biodiesel-Based Fuels
    Xuan Phuong Nguyen
    Hai Nam Vu
    INTERNATIONAL JOURNAL OF RENEWABLE ENERGY DEVELOPMENT-IJRED, 2019, 8 (02): : 119 - 132
  • [23] Evaluation of the Discharge Coefficient of Diesel Nozzles when Using Biodiesel Fuels
    Rosca, Radu
    Carlescu, Petru
    Manolache, Gheorghe
    PROCEEDINGS OF THE INTERNATIONAL SCIENTIFIC CONGRESS - LIFE SCIENCES, A CHALLENGE FOR THE FUTURE, 2019, : 111 - 116
  • [24] Alternative fuels for marine applications: Biomethanol-biodiesel-diesel blends
    Paulauskiene, Tatjana
    Bucas, Martynas
    Laukinaite, Airida
    FUEL, 2019, 248 : 161 - 167
  • [25] Droplet combustion of blended fuels with alcohol and biodiesel/diesel in microgravity condition
    Pan, Kuo-Long
    Chiu, Ming-Chun
    FUEL, 2013, 113 : 757 - 765
  • [26] Experimental investigation of nozzle cavitating flow characteristics for diesel and biodiesel fuels
    H. K. Suh
    S. H. Park
    C. S. Lee
    International Journal of Automotive Technology, 2008, 9 : 217 - 224
  • [27] Effect of In-Cylinder Conditions on Spray Characteristics of Diesel, Biodiesel, and Biodiesel-Ethanol Blended Fuels
    Song, Lanbo
    Liu, Tao
    Meng, Kesheng
    Fu, Wei
    Yi, Bolun
    Li, Fengyu
    Lin, Qizhao
    JOURNAL OF ENERGY ENGINEERING, 2018, 144 (03)
  • [28] Emission characteristics of diesel, gas to liquid, and biodiesel-blended fuels in a diesel engine for passenger cars
    Moon, Gunfeel
    Lee, Yonggyu
    Choi, Kyonam
    Jeong, Dongsoo
    FUEL, 2010, 89 (12) : 3840 - 3846
  • [29] The influence of nano additive blended biodiesel fuels on the working characteristics of a diesel engine
    J. Sadhik Basha
    R. B. Anand
    Journal of the Brazilian Society of Mechanical Sciences and Engineering, 2013, 35 : 257 - 264
  • [30] The influence of nano additive blended biodiesel fuels on the working characteristics of a diesel engine
    Basha, J. Sadhik
    Anand, R. B.
    JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING, 2013, 35 (03) : 257 - 264