Pre-conditioning and dual constant composition dissolution kinetics of pulsed laser deposited hydroxyapatite thin films on silicon substrates

The kinetics of dissolution of pulsed laser deposited crystalline and amorphous thin films of hydroxyapatite on silicon substrates were measured at 37 degrees C and a pH value of 6.5 using the dual constant composition method. Solutions in which the pulsed laser deposited films were preconditioned (0.15 M NaCl) remained undersaturated or slightly supersaturated with respect to hydroxyapatite after equilibrium was reached, indicating only a very small coating release and the absence of re-precipitation on the surfaces. The amorphous films released more calcium and phosphate during pre-conditioning than the more crystalline films. Dual constant composition dissolution rates decreased as film crystallinity increased. The film with the lowest dissolution rate (approximately one sixth that of a crystalline film deposited using a hydroxyapatite powder target) was fabricated using a human tooth as the laser target. During pre-conditioning of plasma-sprayed coatings, more calcium and phosphate were released than for pulsed laser deposited films, and dual constant composition dissolution rates were much higher.