Age-Induced Precipitation and Hardening Behavior of Ni3Al Intermetallic Alloys Containing Vanadium

被引:5
作者
Semboshi, Satoshi [1 ]
Sasaki, Ryosuke [2 ]
Kaneno, Yasuyuki [2 ]
Takasugi, Takayuki [2 ]
机构
[1] Tohoku Univ, Inst Mat Res, Aoba Ku, Katahira 2-1-1, Sendai, Miyagi 9808577, Japan
[2] Osaka Prefecture Univ, Dept Mat Sci, Naka Ku, Gakuen Cho 1-1, Sakai, Osaka 5998531, Japan
基金
日本学术振兴会;
关键词
Ni3Al; vanadium; aging; microstructure; precipitation; strength; HIGH-TEMPERATURE STRENGTH; STRAIN-RATE; MECHANICAL-PROPERTIES; TENSILE PROPERTIES; PLASTIC BEHAVIOR; VOLUME FRACTION; BINARY; AL; MICROSTRUCTURE; DUCTILITY;
D O I
10.3390/met9020160
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
L1(2)-type Ni3Al alloys containing vanadium are potential candidates for solid-solution and age-hardenable alloy systems, according to the Ni3Al-Ni3V pseudo-binary phase diagram. Therefore, herein, variations in the microstructure and mechanical properties of Ni-13 at.% Al-12 at.% V-50 ppm B alloy during isothermal aging were investigated. Alloy specimens were solution-treated at 1323 K for 48 h, quenched in water, and aged at 1073 K to 1173 K. The quenched specimens exhibited a single phase of Ni3Al (L1(2) structure derived from Al (fcc) structure), while in the aged specimens, numerous fine disk-shaped precipitates identified as Ni3V (D0(22) structure from orthorhombic structure) were formed on {001} planes of the Ni3Al matrix. The size of the disk-shaped Ni3V precipitates increased gradually with increasing aging period. The hardness and strength of the specimens increased initially during aging at 1073 K to 1173 K, reached a maximum, followed by a subsequent decrease. The age-hardening behavior observed for the specimens can be explained in terms of precipitation of the fine disk-shaped Ni3V precipitates in the Ni3Al matrix. Furthermore, the peak-aged specimens exhibited an increase in yield strength with increasing testing temperature, similar to other L1(2)-type intermetallic alloys.
引用
收藏
页数:11
相关论文
共 47 条
[1]  
[Anonymous], 2008, SUPERALLOYS FUNDAMEN, DOI DOI 10.1017/CBO9780511541285
[2]   DUCTILIZATION OF L12 INTERMETALLIC COMPOUND NI3AL BY MICROALLOYING WITH BORON [J].
AOKI, K .
MATERIALS TRANSACTIONS JIM, 1990, 31 (06) :443-448
[3]  
Arzt E, 1996, Z METALLKD, V87, P874
[4]   Dispersion strengthening of intermetallics [J].
Arzt, E ;
Behr, R ;
Gohring, E ;
Grahle, P ;
Mason, RP .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 234 :22-29
[5]   Development of Ni-based superalloys for microelectromechanical systems [J].
Burns, Devin E. ;
Zhang, Yong ;
Teutsch, Michael ;
Bade, Klaus ;
Aktaa, Jarir ;
Hemker, Kevin J. .
SCRIPTA MATERIALIA, 2012, 67 (05) :459-462
[6]   Room-temperature mechanical properties of cold-rolled thin foils of binary, stoichiometric Ni3Al [J].
Demura, M ;
Kishida, K ;
Suga, Y ;
Hirano, T .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2002, 33 (08) :2607-2613
[7]   Stress response by the strain-rate change in a binary stoichiometric Ni3Al single crystal [J].
Demura, M ;
Hirano, T .
PHILOSOPHICAL MAGAZINE LETTERS, 1997, 75 (03) :143-148
[8]   Fine Precipitation in the Channel Region of Two-Phase Ni3Al and Ni3V Intermetallic Alloys Containing Mo and W [J].
Edatsugi, Daisuke ;
Kaneno, Yasuyuki ;
Semboshi, Satoshi ;
Takasugi, Takayuki .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2016, 47A (03) :998-1008
[9]   Tensile properties of Ni-based superalloy 720Li: Temperature and strain rate effects [J].
Gopinath, K. ;
Gogia, A. K. ;
Kamat, S. V. ;
Balamuralikrishnan, R. ;
Ramamurty, U. .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2008, 39A (10) :2340-2350
[10]   MEASUREMENTS OF ANTIPHASE BOUNDARY AND COMPLEX STACKING-FAULT ENERGIES IN BINARY AND B-DOPED NI3AL USING TEM [J].
HEMKER, KJ ;
MILLS, MJ .
PHILOSOPHICAL MAGAZINE A-PHYSICS OF CONDENSED MATTER STRUCTURE DEFECTS AND MECHANICAL PROPERTIES, 1993, 68 (02) :305-324