Comparison of Tubular and Planar Design of a Micro Linear Generator for Vibration Energy Harvesting

被引:0
作者
Nor, Nur 'Izzah Mohd [1 ]
Romlie, Mohd Fakhizan [1 ]
Kannan, Ramani [1 ]
机构
[1] Univ Teknol PETRONAS, Dept Elect & Elect Engn, Tronoh 31750, Perak, Malaysia
来源
2015 IEEE CONFERENCE ON ENERGY CONVERSION (CENCON) | 2015年
关键词
Vibration; Energy Harvester; Micro Linear Generator;
D O I
暂无
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Vibration sources is available from many appliances such as motors, generators and rotating devices. This vibration can be harvested and converter to electrical energy to power up wireless sensor network and low power electronic devices. An energy harvester is attached to the vibrating source to harvest the energy. The use of micro linear generator comprising of magnet, moving rotor, stator and windings, will enable users to harvest the vibration energy. The generator converts the vibration energy to electrical energy. In this research, a model of a micro linear generator is presented. This paper focuses on comparing a tubular and a planar design of the micro linear generator for vibration energy harvesting. On top of that, the slotted and slot-less designs are also compared. With the Finite Element Analysis (FEA) software, Ansoft Maxwell, the magnetic flux, flux lines, magnetic field and induced voltage of the various designs of the generator are analysed. By evaluating the simulation results, the tubular slotted design is found to be the best design that produced the best output.
引用
收藏
页码:233 / 237
页数:5
相关论文
共 8 条
  • [1] Analysis of a Tubular Linear Permanent Magnet Motor for Reciprocating Compressor Applications
    Abdalla, Izzeldin Idris
    Ibrahim, Taib
    Nor, Nursyarizal Bin Mohd
    [J]. RENEWABLE ENERGY AND ENVIRONMENTAL TECHNOLOGY, PTS 1-6, 2014, 448-453 : 2114 - 2119
  • [2] Platform Architecture for Solar, Thermal, and Vibration Energy Combining With MPPT and Single Inductor
    Bandyopadhyay, Saurav
    Chandrakasan, Anantha P.
    [J]. IEEE JOURNAL OF SOLID-STATE CIRCUITS, 2012, 47 (09) : 2199 - 2215
  • [3] Hamim M. A. F. M., 2013, DESIGN PORTABLE PIEO, P0
  • [4] Ambient RF Energy-Harvesting Technologies for Self-Sustainable Standalone Wireless Sensor Platforms
    Kim, Sangkil
    Vyas, Rushi
    Bito, Jo
    Niotaki, Kyriaki
    Collado, Ana
    Georgiadis, Apostolos
    Tentzeris, Manos M.
    [J]. PROCEEDINGS OF THE IEEE, 2014, 102 (11) : 1649 - 1666
  • [5] Mitcheson B.P. D., 2008, Human and Machine Motion for Wireless Electronic Devices, V96, P1457
  • [6] Energy harvesting from human and machine motion for wireless electronic devices
    Mitcheson, Paul D.
    Yeatman, Eric M.
    Rao, G. Kondala
    Holmes, Andrew S.
    Green, Tim C.
    [J]. PROCEEDINGS OF THE IEEE, 2008, 96 (09) : 1457 - 1486
  • [7] Optimisation of a tubular linear machine with permanent magnets for wave energy extraction
    Parel, Thomas S.
    Rotaru, Mihai D.
    Sykulski, Jan K.
    Hearn, Grant E.
    [J]. COMPEL-THE INTERNATIONAL JOURNAL FOR COMPUTATION AND MATHEMATICS IN ELECTRICAL AND ELECTRONIC ENGINEERING, 2011, 30 (03) : 1056 - 1068
  • [8] Sattarov R. R., 2015, 2015 INT SIB C CONTR, P3