Microstructure and Impact Resistance Analysis of 7075 Aluminum Alloy Modified by FSP

被引：1
|
作者：
Liu, Shengrong [1 ,2 ]
Xu, Feng [1 ]
Wang, Jianli [2 ]
Wang, Hongfeng [2 ]
Ge, Xiaole [2 ]
Pu, Jiafei [2 ]
机构：
[1] Nanjing Univ Aeronaut & Astronaut, Coll Mech & Elect Engn, Nanjing, Peoples R China
[2] Huangshan Univ, Coll Mech & Elect Engn, Huangshan, Peoples R China
来源：
INTEGRATED FERROELECTRICS | 2020年 / 209卷 / 01期
基金：
中国国家自然科学基金;
关键词：
Friction stir processing; impact toughness; microstructure; 7075 aluminum alloy; fracture morphology; FRICTION; BEHAVIOR;
D O I：
10.1080/10584587.2020.1728806
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
The hot rolled 7075 aluminum alloy was modified by friction stir processing (FSP) technology, and the effects of different processing parameters on impact toughness and microstructure of machining region were analyzed. The results showed that the impact toughness of machining region was 2.3 times that of the base metal when the rotation velocity was 1200 r/min and the feed rate was 60 mm/min, which much higher than base metal. The fracture morphology was observed by using scanning electron microscope and found that the morphology of fracture dimple was uniform and smooth. The grains in the weld nugget zone were obviously refined after friction stir processing, and the grain refinement effects were not the same in different processing parameters.
引用
收藏
页码：40 / 47
页数：8
相关论文
共 50 条
  • [1] Analysis of friction and wear properties of 7075 aluminum alloy modified by FSP
    Liu S.
    Wang J.
    Wang H.
    Ge X.
    Pu J.
    Key Engineering Materials, 2020, 866 : 135 - 142
  • [2] Microstructure analysis of 7075/Cf-TiB2 modified layer prepared by FSP
    Liu, Shengrong
    FERROELECTRICS, 2021, 581 (01) : 117 - 124
  • [3] WEAR RESISTANCE ANALYSIS OF THE ALUMINUM 7075 ALLOY AND THE NANOSTRUCTURED ALUMINUM 7075-SILVER NANOPARTICLES COMPOSITES
    Estrada-Ruiz, R. H.
    Flores-Campos, R.
    Trevino-Rodriguez, G. A.
    Herrera-Ramirez, J. M.
    Martinez-Sanchez, R.
    JOURNAL OF MINING AND METALLURGY SECTION B-METALLURGY, 2016, 52 (02) : 163 - 170
  • [4] Analysis of microstructure and wear resistance of friction stir welded joints of 7075-T6 aluminum alloy
    Pu, Jiafei
    Bondarev, Serhii
    Wang, Hongfeng
    Song, Weiwei
    Liu, Shengrong
    Jiang, Di
    FERROELECTRICS, 2023, 608 (01) : 109 - 123
  • [5] Microscopic characteristics and corrosion resistance of 7075 aluminum alloy modified by friction stir processing
    Liu, Shengrong
    Wang, Hongfeng
    Ge, Xiaole
    Pu, Jiafei
    Dong, Qi
    FERROELECTRICS, 2022, 594 (01) : 69 - 81
  • [6] Characterization of microstructure and selected properties of SnSbCu alloy after FSP
    Hrabia-Wisnios, Joanna
    Leszczynska-Madej, Beata
    Madej, Marcin
    Weglowska, Aleksandra
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 117 (1-2) : 469 - 479
  • [7] Microstructure Evolution of 7075 Aluminum Alloy by Rotary
    Cao, Hui
    Yang, Yongbiao
    Zhang, Xing
    Ma, Jin
    Zhang, Tingyan
    Zhang, Zhimin
    MATERIALS, 2022, 15 (04)
  • [8] Observation of the microstructure in the adiabatic shear band of 7075 aluminum alloy
    Li, D. H.
    Yang, Y.
    Xu, T.
    Zheng, H. G.
    Zhu, Q. S.
    Zhang, Q. M.
    MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2010, 527 (15): : 3529 - 3535
  • [9] Fatigue properties of a modified 7075 aluminum alloy containing scandium
    Hyun, Chang-Young
    Kim, Ho-Kyung
    JOURNAL OF MATERIALS SCIENCE, 2010, 45 (11) : 3067 - 3072
  • [10] Gas tungsten arc welding of 7075 aluminum alloy: microstructure properties, impact strength, and weld defects
    Cevik, Bekir
    MATERIALS RESEARCH EXPRESS, 2018, 5 (06)
12345