Development of a Hybrid MEMS BLDC Micromotor

被引：33

作者：

Merzaghi, Sebastiano ^{[1
]}

Koechli, Christian ^{[1
]}

Perriard, Yves ^{[1
]}

机构：

[1] Ecole Polytech Fed Lausanne, Integrated Actuators Lab, CH-1015 Lausanne, Switzerland

来源：

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS | 2011年 / 47卷 / 01期

关键词：

Brushless motors; microelectromechanical devices; microelectromechanical systems (MEMS); micromotors; permanent-magnet motors; OPTIMIZATION; MOTOR;

D O I：

10.1109/TIA.2010.2090841

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This paper addresses the design of a new hybrid microelectromechanical systems (MEMS) micromotor. It is a small three-phase axial flux brushless dc (BLDC) motor. The stator is developed following the almost-standard CMOS technology rules used for MEMS manufacturing, and the coils have two copper layers. The rotor is made of a ring permanent magnet assembled over the stator chip. The stator design has been performed using an analytical model also presented in this paper. The microfabrication of the first prototypes is presented, followed by their characterization. With an efficiency of about 42% for an input power of 310 nW, this MEMS micromotor has very good performance and demonstrates the potential of electromagnetic systems at this scale.

引用

页码：3 / 11

页数：9

共 50 条

[21] Single-Device and On-Chip Feedthrough Cancellation for Hybrid MEMS Resonators
Xu, Yuanjie
Lee, Joshua E. -Y.
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2012, 59 (12) : 4930 - 4937
[22] MEMS Emulator: A Tool for Development and Testing of Electronics for Microelectromechanical Systems
Minotti, Paolo
Pagani, Leonardo Gaffuri
Aresi, Nicola
Langfelder, Giacomo
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 2018, 27 (02) : 321 - 332
[23] Development of nanocavity sealing process for MEMS optical interferometric biosensor
Takahashi, Kazuhiro
Masuya, Yoshihiro
Ozawa, Ryo
Ishida, Makoto
Sawada, Kazuaki
2015 International Conference on Electronic Packaging and iMAPS All Asia Conference (ICEP-IAAC), 2015, : 120 - 123
[24] Development and Experimental Evaluation of a Novel Piezoresistive MEMS Strain Sensor
Mohammed, Ahmed A. S.
Moussa, Walied A.
Lou, Edmond
IEEE SENSORS JOURNAL, 2011, 11 (10) : 2220 - 2232
[25] Development of new low stress epoxies for MEMS device encapsulation
Wu, JL
Wong, CP
IEEE TRANSACTIONS ON COMPONENTS AND PACKAGING TECHNOLOGIES, 2002, 25 (02): : 278 - 282
[26] Design, Development and Testing of MEMS based Seismometer for Space Application
Saxena, Gaurav Dutta
Agarwal, Etika
Selveraj, P.
Thamarai, V.
John, Jiju
Arvind, Kalpana
Islam, Rafiqul
2013 INTERNATIONAL CONFERENCE ON ADVANCES IN COMPUTING, COMMUNICATIONS AND INFORMATICS (ICACCI), 2013, : 1705 - 1709
[27] ELECTROMAGNETIC DESIGN BASED ON HYBRID ANALYTICAL AND 3-D FINITE ELEMENT METHOD FOR NOVEL TWO LAYERS BLDC MACHINE
Cheshmehbeigi, Hassan M.
Afjei, Ebrahim
Nasiri, Behnaz
PROGRESS IN ELECTROMAGNETICS RESEARCH-PIER, 2013, 136 : 141 - 155
[28] Hybrid ring coupler for W-band MMIC applications using MEMS technology
Kim, SC
Ko, BS
Baek, TJ
Lim, BO
An, D
Shin, DH
Rhee, JK
IEEE MICROWAVE AND WIRELESS COMPONENTS LETTERS, 2005, 15 (10) : 652 - 654
[29] Hybrid MEMS Actuator With 3 Degrees-of-Freedom for Efficient Planar Optical Switching
Sharma, Suraj
Nabavi, Seyedfakhreddin
Rabih, Almur Abdelkreem Saeed
Menard, Michael
Nabki, Frederic
JOURNAL OF MICROELECTROMECHANICAL SYSTEMS, 2023, 32 (06) : 593 - 603
[30] Design and development of Truncated Angle Variant (TAV) controller for multi-source-fed BLDC motor drive
G. R. Rajesh Kanna
R. M. Sasiraja
D. Prince Winston
Electrical Engineering, 2020, 102 : 1931 - 1946

← 1 2 3 4 5 →