Effect of secondary phase on mechanical and thermal conductivity of Al-Si-xFe-Mg-yCu-Mn die casting alloys

被引：7
作者：
Kumar, L. [1 ]
Jang, J. C. [1 ]
Yu, H. [2 ]
Shin, K. S. [1 ]
机构：
[1] Seoul Natl Univ, Dept Mat Sci & Engn, Seoul, South Korea
[2] Hebei Univ Technol, Sch Mat Sci & Engn, Tianjin, Peoples R China
来源：
MATERIALS LETTERS | 2022年 / 314卷
关键词：
Al-Si alloy; High-Pressure Diecasting; Thermodynamic Prediction; Secondary-phase; Mechanical Property; Thermal Conductivity; BEHAVIOR;
D O I：
10.1016/j.matlet.2022.131889
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
In the present study, effect of secondary phase on mechanical property and thermal conductivity of newly developed high-pressure die-cast Al-6Si-0.3Fe-1.5 Mg(S-1), Al-6.5Si-0.4Fe-1.6 Mg-0.7Cu-0.08Mn(S-2), and Al-8Si-0.5Fe-0.5 Mg-1.5Cu-0.10Mn-0.1Ni(S-3) alloys were investigated. The fraction of alpha-Al phase and secondary phase has been predicted by thermodynamic simulations. UTS was found to be 307 MPa, 331 MPa and 350 MPa for S-1 similar to 3 alloys. The thermal conductivities values are 160.3 W/mK, 153.0 W/mK, and 146.0 W/mK for S-1 similar to 3 alloys. The S-3 alloy has the highest fraction of the secondary phases and as a result of the addition of Fe and Cu is partially precipitated into the Al5Cu2Mg8Si6, Al7Cu2M and beta-AlFeSi phases. The mechanical properties of these alloys were found to be directly proportional to the fraction of Si addition as well as secondary phases, whereas thermal conductivity shows the opposite trend. Newly developed S-3 alloys in the present study showed excellent mechanical and thermal conductivity as compared to other Al alloys reported in the literature.
引用
收藏
页数：5
相关论文
共 21 条
[1]  
[Anonymous], 2004, AL SIL CAST ALL, V1, P9
[2]  
Arthanari S, 2017, CORROS SCI TECHNOL-K, V16, P100, DOI 10.14773/cst.2017.16.3.100
[3]   Strength-ductility behaviour of Al-Si-Cu-Mg casting alloys in T6 temper [J].
Cáceres, CH ;
Svensson, IL ;
Taylor, JA .
INTERNATIONAL JOURNAL OF CAST METALS RESEARCH, 2003, 15 (05) :531-543
[4]   Grain Boundary Phenomena in an Ultrafine-Grained Al-Zn Alloy with Improved Mechanical Behavior for Micro-Devices [J].
Chinh, Nguyen Q. ;
Valiev, Ruslan Z. ;
Sauvage, Xavier ;
Varga, Gabor ;
Havancsak, Karoly ;
Kawasaki, Megumi ;
Straumal, Boris B. ;
Langdon, Terence G. .
ADVANCED ENGINEERING MATERIALS, 2014, 16 (08) :1000-1009
[5]  
Deross A.B.., 1986, ALUMINUM CASTING TEC, P31
[6]   Structural behaviour of Al-Si die-castings: Experiments and numerical simulations [J].
Dorum, C. ;
Laukli, H. I. ;
Hopperstad, O. S. ;
Langseth, M. .
EUROPEAN JOURNAL OF MECHANICS A-SOLIDS, 2009, 28 (01) :1-13
[7]   Influence of different solution methods on microstructure, precipitation behavior and mechanical properties of Al-Mg-Si alloy [J].
Gao, Guan-jun ;
He, Chen ;
Li, Yong ;
Li, Jia-dong ;
Wang, Zhao-dong ;
Misra, R. D. K. .
TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, 2018, 28 (05) :839-847
[8]  
Kaufman J.G., 2007, ALUMINUM ALLOY CAST, V33, P243
[9]   Development of Innovative Al-Si-Mn-Mg Alloys with High Mechanical Properties [J].
Medved, Jozef ;
Kores, Stanislav ;
Voncina, Maja .
LIGHT METALS 2018, 2018, :373-380
[10]   Vacuum assisted high pressure die casting of aluminium alloys [J].
Niu, XP ;
Hu, BH ;
Pinwill, I ;
Li, H .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2000, 105 (1-2) :119-127
123