A modified wall boiling model considering sliding bubbles based on the RPI wall boiling model

被引：28
|
作者：
Shi, Jiangwu [1 ]
Zhang, Rui [1 ]
Zhu, Zhiqiang [2 ]
Ren, Tingting [1 ]
Yan, Changqi [1 ]
机构：
[1] Harbin Engn Univ, Fundamental Sci Nucl Safety & Simulat Technol Lab, Harbin 150001, Peoples R China
[2] Wuhan Second Ship Design & Res Inst, Wuhan 430060, Hubei, Peoples R China
来源：
INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER | 2020年 / 154卷
关键词：
Sliding bubbles; Heat transfer; Boiling model; HEAT-TRANSFER; VAPOR BUBBLES; FLOW; PREDICTION; DEPARTURE; BEHAVIOR; AREA;
D O I：
10.1016/j.ijheatmasstransfer.2020.119776
中图分类号：
O414.1 [热力学];
学科分类号：
摘要：
The bubble sliding is an important phenomenon in subcooled boiling flow, which has a significant influence to heat transfer, while the RPI wall boiling model does not consider the influence of sliding bubbles directly. This paper proposes a modified wall boiling model considering the sliding bubbles, and the simulation results of the modified model are compared with the experimental data to verify the accuracy of the model. According to the results, the modified model is applicable for the mass flux from 648.4 to 1630 kg/(m(2).s), with the heat flux range of 227 to 306 kW/m(2), the inlet subcooled temperature range of 30 to 50 K and the pressure range of 0.2 to 0.4 MPa. In addition, bubble departure diameter, bubble lift-off diameter, bubble sliding distance and the distribution of heat flux are discussed in this paper. (C) 2020 Elsevier Ltd. All rights reserved.
引用
收藏
页数：13
相关论文
共 50 条
  • [1] Modeling of subcooled boiling by extending the RPI wall boiling model to ultra-high pressure conditions
    Gu, Junping
    Wang, Qinggong
    Wu, Yuxin
    Lyu, Junfu
    Li, Suhui
    Yao, Wei
    APPLIED THERMAL ENGINEERING, 2017, 124 : 571 - 584
  • [2] Development of subcooled wall boiling model considering bubble sliding in narrow rectangular channel
    Wang, Mingjun
    Li, Linfeng
    Liu, Kai
    Zhang, Jing
    Tian, Wenxi
    Qiu, Suizheng
    Su, Guanghui
    INTERNATIONAL JOURNAL OF THERMAL SCIENCES, 2022, 181
  • [3] AN EVALUATION OF THE RPI MODEL FOR THE PREDICTION OF THE WALL HEAT FLUX PARTITIONING IN SUBCOOLED BOILING FLOWS
    Thakrar, Ronak
    Murallidharan, Janani S.
    Walker, Simon P.
    PROCEEDINGS OF THE 22ND INTERNATIONAL CONFERENCE ON NUCLEAR ENGINEERING - 2014, VOL 5, 2014,
  • [4] On Development of a Semimechanistic Wall Boiling Model
    Das, Saurish
    Punekar, Hemant
    JOURNAL OF HEAT TRANSFER-TRANSACTIONS OF THE ASME, 2016, 138 (06):
  • [5] A model of critical boiling flow with account of wall boiling-up
    O. E. Ivashnev
    Fluid Dynamics, 2014, 49 : 63 - 76
  • [6] A model of critical boiling flow with account of wall boiling-up
    Ivashnev, O. E.
    FLUID DYNAMICS, 2014, 49 (01) : 63 - 76
  • [7] Prediction model and analysis for velocity of sliding bubble near wall in horizontal flow boiling
    Xu, Jian-Jun
    Chen, Bing-De
    Wang, Xiao-Jun
    Yuanzineng Kexue Jishu/Atomic Energy Science and Technology, 2009, 43 (05): : 426 - 430
  • [8] Analyses of monoblocks divertor at one-sided high heat flux using RPI wall boiling model
    Yu, Shuwen
    Lu, Jianchao
    Peng, Changhong
    APPLIED THERMAL ENGINEERING, 2021, 199
  • [9] ON DEVELOPMENT OF A SEMI-MECHANISTIC WALL BOILING MODEL
    Das, Saurish
    Punekar, Hemant
    PROCEEDINGS OF THE ASME INTERNATIONAL MECHANICAL ENGINEERING CONGRESS AND EXPOSITION, 2013, VOL 8B, 2014,
  • [10] A wall heat transfer model for subcooled boiling flow
    Steiner, H
    Kobor, A
    Gebhard, L
    INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2005, 48 (19-20) : 4161 - 4173
12345