Efficient Mode Transition Control for Parallel Hybrid Electric Vehicle With Adaptive Dual-Loop Control Framework

被引:64
作者
Yang, Chao [1 ]
Shi, Yang [2 ]
Li, Liang [3 ]
Wang, Xiangyu [3 ]
机构
[1] Beijing Inst Technol, Sch Mech Engn, Beijing 100081, Peoples R China
[2] Univ Victoria, Dept Mech Engn, Victoria, BC V8W 3P6, Canada
[3] Tsinghua Univ, State Key Lab Automot Safety & Energy, Beijing 100084, Peoples R China
基金
中国国家自然科学基金;
关键词
Hybrid electric vehicle; clutch engagement control; clutch actuator; parallel hybrid powertrain; adaptive control; CLUTCH TRANSMISSION; ENERGY MANAGEMENT; CONTROL STRATEGY;
D O I
10.1109/TVT.2019.2962509
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
Mode transition control problem in a hybrid powertrain has always been a central concern, because many complicated transient dynamics are involved in this process, such as engine-start, clutch engagement, and actuator control, etc. Especially for a parallel hybrid electric vehicle (HEV), the drivability problem during mode transition process is significant yet challenging to solve. In this paper, a new efficient mode transition control method with adaptive dual-loop control framework is proposed for the clutch engagement in a parallel HEV. Firstly, the expected clutch engaging speed can be calculated by two approaches, optimization method via particle swarm optimization algorithm, and practical method by compromising the transient vehicle jerk and the clutch slipping power, respectively. Utilizing the integral transformation, the demand clutch position trajectory for the inner loop can be obtained. Considering the uncertainties and the backlash in the clutch actuator system, an adaptive state feedback controller is designed in the inner loop. Simulation and experimental results show that the proposed control method can effectively improve the HEV drivability while taking clutch actuator uncertainties into consideration. Furthermore, compared with the control method commonly used in practice, the time of mode transition process can be shortened and vehicle jerk can be controlled within an acceptable range using the proposed method.
引用
收藏
页码:1519 / 1532
页数:14
相关论文
共 28 条
[1]   Multivariable speed synchronisation for a parallel hybrid electric vehicle drivetrain [J].
Alt, B. ;
Antritter, F. ;
Svaricek, F. ;
Schultalbers, M. .
VEHICLE SYSTEM DYNAMICS, 2013, 51 (03) :321-337
[2]  
[Anonymous], 2011, SAE TECHNICAL PAPER
[3]   On the Control of Engine Start/Stop Dynamics in a Hybrid Electric Vehicle [J].
Canova, Marcello ;
Guezennec, Yann ;
Yurkovich, Steve .
JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 2009, 131 (06) :1-12
[4]   Torque Coordination Control During Mode Transition for a Series-Parallel Hybrid Electric Vehicle [J].
Chen, Li ;
Xi, Gang ;
Sun, Jing .
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 2012, 61 (07) :2936-2949
[5]   Energy Management for a Power-Split Plug-in Hybrid Electric Vehicle Based on Dynamic Programming and Neural Networks [J].
Chen, Zheng ;
Mi, Chunting Chris ;
Xu, Jun ;
Gong, Xianzhi ;
You, Chenwen .
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 2014, 63 (04) :1567-1580
[6]   Dry clutch control based on electromechanical actuator position feedback loop [J].
Deur, Josko ;
Ivanovic, Vladimir ;
Herold, Zvonko ;
Kostelac, Milan ;
Tseng, Hongtei Eric .
INTERNATIONAL JOURNAL OF VEHICLE DESIGN, 2012, 60 (3-4) :305-326
[7]   Model Reference Adaptive Control for Hybrid Electric Vehicle With Dual Clutch Transmission Configurations [J].
Elzaghir, Walid ;
Zhang, Yi ;
Natarajan, Narasimhamurthi ;
Massey, Frank ;
Mi, Chunting Chris .
IEEE TRANSACTIONS ON VEHICULAR TECHNOLOGY, 2018, 67 (02) :991-999
[8]   Position Control of Electric Clutch Actuator Using a Triple-Step Nonlinear Method [J].
Gao, Bingzhao ;
Chen, Hong ;
Liu, Qifang ;
Chu, Hongqing .
IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2014, 61 (12) :6995-7003
[9]  
Guzzella L, 2013, Vehicle Propulsion Systems, Vthird
[10]   Flatness-based clutch control for automated manual transmissions [J].
Horn, J ;
Bamberger, J ;
Michau, P ;
Pindl, S .
CONTROL ENGINEERING PRACTICE, 2003, 11 (12) :1353-1359