Failure analysis of a sugarcane loader rear shaft

被引：11

作者：

Azevedo, Thiago Figueiredo ^{[1
]}

Viana Sampaio, Weslley Rick ^{[1
]}

Bezerra Camara, Eduardo Cesar ^{[1
]}

Lima, Gustavo Doria ^{[1
]}

dos Santos Silva, Wisnner Franklin ^{[1
]}

Ramos, Simone da Silva ^{[1
]}

机构：

[1] Fed Inst Alagoas, Lab Mech, Campus Coruripe, Coruripe, AL, Brazil

来源：

ENGINEERING FAILURE ANALYSIS | 2020年 / 109卷

关键词：

Failure analysis; Numerical simulation; Sugarcane loader; Microstructural characterization; AXLE SHAFT; FATIGUE;

D O I：

10.1016/j.engfailanal.2019.104326

中图分类号：

TH [机械、仪表工业];

学科分类号：

0802 ;

摘要：

This work deals with the failure analysis of rear differential shaft of a sugarcane loader that broke in less than a year of use. For the analysis of fracture, fracture surface macrographs, microhardness profile and metallographic analysis were realized. It was also carried out a numerical simulation of shaft estimating the external stresses applied during use. The numerical simulation was performed in linear elastic regime. The microstructure on the surface is composed of martensite and ferrite caused by the superficial hardening heat treatment and in the core formed by perlite and ferrite. The microhardness profile showed a hardness peak of 648 HV in the peripheral region of the shaft. From the analysis of the fracture surface it was possible to observe that the failure occurred in unidirectional fatigue of high cycle, and we observed several ratchet marks along the rounding radius of the shaft. The numerical simulation permitted to quantify the stresses and showed that rounding radius in the shaft base was the cause of failure.

引用

页数：8

共 17 条

[1]

[Anonymous], 1990, ASM Handbook - Properties and selection - irons, steels and high-performance alloys, V1

[2]

[Anonymous], 2017, CATALOGUE VALTRA SUG

[3] Fatigue failure of a rear axle shaft of an automobile [J].

Asi, Osman .

ENGINEERING FAILURE ANALYSIS, 2006, 13 (08) :1293-1302

[4] Analysis of turbo impeller rotor failure [J].

Azevedo, Thiago Figueiredo ;

Cardoso, Raphael Calazans ;

Tavares da Silva, Paulo Rogerio ;

Silva, Abraao Santos ;

Griza, Sandro .

ENGINEERING FAILURE ANALYSIS, 2016, 63 :12-20

[5] Failure analysis of the repair procedure of an ore compactor roll [J].

Azevedo, Thiago Figueiredo ;

dos Santos, Cristiane Ramos ;

Aquino de Souza, Ricardo Estefany ;

Tentardini, Eduardo Kirinus ;

Griza, Sandro .

ENGINEERING FAILURE ANALYSIS, 2013, 31 :195-202

[6] Failure Analysis of the Axle Shaft of an Automobile [J].

Bhagoria, Palak ;

John, Siju Tom ;

Patangia, Palash ;

Purohit, Rajesh .

MATERIALS TODAY-PROCEEDINGS, 2017, 4 (04) :5398-5407

[7]

Budynas R G, 2008, SHIGLEYS MECH ENG DE

[8]

Casanova F, 2011, DYNA-COLOMBIA, V78, P48

[9]

Das Souvik, 2015, Case Studies in Engineering Failure Analysis, V3, P46, DOI 10.1016/j.csefa.2015.01.003

[10] Metallurgical failure analysis of acetabular metal-backed screws [J].

Griza, Sandro ;

Azevedo, Thiago Figueiredo ;

dos Santos, Silvando V. ;

Tentardini, Eduardo K. ;

Strohaecker, Telmo R. .

ENGINEERING FAILURE ANALYSIS, 2013, 32 :178-187

← 1 2 →