Cr2AlC MAX phase foams by replica method

被引：15

作者：

Karimi, Soheil ^{[1
]}

Go, Teresa ^{[1
]}

Vassen, Robert ^{[1
]}

Gonzalez-Julian, Jesus ^{[1
]}

机构：

[1] Forschungszentrum Julich, Inst Energy & Climate Res Mat Synth & Proc IEK 1, D-52425 Julich, Germany

来源：

MATERIALS LETTERS | 2019年 / 240卷

关键词：

Porous materials; MAX phases; Cr2AlC; Replica method; Colloidal processing; MECHANICAL-PROPERTIES; TI2ALC; MICROSTRUCTURE; OXIDATION; POROSITY;

D O I：

10.1016/j.matlet.2019.01.026

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Highly pure Cr2AlC foams with high pore interconnectivity were processed by replica method, infiltrating commercial polyurethane foams with 20 and 30 pore per inch (ppi). Content of solid, dispersant and thickener was adjusted to achieve slurries with shear-thinning behavior. Cr2AlC foams were successfully obtained after two consecutive infiltrations, followed by two thermal processes, first in air to burn-out the polymeric foams and then in argon to consolidate the porous structure. The developed foams (cylinders with 40 mm diameter and 20 mm height) present high potential as component for heat exchangers and volumetric solar receivers. (C) 2019 Elsevier B.V. All rights reserved.

引用

页码：271 / 274

页数：4

共 50 条

[41] Wetting and imbibition Cr2AlC by liquid Ga: Partial substitution of aluminum by gallium in the MAX phase
Zhevnenko, S. N.
Gorshenkov, M. V.
MATERIALS LETTERS, 2025, 382
[42] Influences of processing parameters on the microstructure and wear performance of Cr2AlC MAX phase prepared by spark plasma sintering method
Shamsipoor, A.
Farvizi, M.
Razavi, M.
Keyvani, A.
JOURNAL OF ALLOYS AND COMPOUNDS, 2020, 815
[43] Tailoring Magnetic Properties of MAX Phases, a Theoretical Investigation of (Cr2Ti)AlC2 and Cr2AlC
Wang, Jiemin
Liu, Zhimou
Zhang, Haibin
Wang, Jingyang
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2016, 99 (10) : 3371 - 3375
[44] Phase formation and microstructure evolution of plasma sprayed Cr2AlC MAX phase coatings under post annealing
Zhang, Fanyong
Yu, Guangxing
Yan, Shu
Chen, Jiawen
Ma, Honglu
He, Jining
Yin, Fuxing
CERAMICS INTERNATIONAL, 2022, 48 (18) : 26063 - 26071
[45] Cr2AlC powders prepared by molten salt method
Tian, Wu-Bian
Wang, Pei-Ling
Kan, Yan-Mei
Zhang, Guo-Jun
JOURNAL OF ALLOYS AND COMPOUNDS, 2008, 461 (1-2) : L5 - L10
[46] Atomic force microscopy and transmission electron microscopy identification of deformation twinning in the Cr2AlC MAX phase
Joulain, Anne
Bahsoun, Hadi
Renou, Gilles
Ouisse, Thierry
Villechaise, Patrick
Tromas, Christophe
ACTA MATERIALIA, 2024, 270
[47] A Cr2AlC MAX Phase-Based Electrochemical Probe for the Detection of Asciminib in Biological and Pharmaceutical Samples
Genc, Asena Ayse
Bouali, Wiem
Erk, Nevin
Kaya, Gul
Ocakoglu, Kasim
CHEMISTRYSELECT, 2025, 10 (02):
[48] Novel Cr2AlC MAX-phase/SiC fiber composites: Synthesis, processing and tribological response
Gonzalez-Julian, J.
Llorente, J.
Bram, M.
Belmonte, M.
Guillon, O.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2017, 37 (02) : 467 - 475
[49] Laser surface texturing and numerical simulation of heat flux on Cr2AlC MAX phase heat exchangers
Mesquita-Guimaraes, J.
Ferreira, N. M.
Reis, R. M. S.
Gonzalez-Julian, J.
Pinho-da-Cruz, J.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2023, 43 (14) : 5894 - 5903
[50] Investigation of the Composition and Properties of a Cr2AlC MAX Phase-Based Material Prepared by Metallothermic SHS
Gorshkov, V. A.
Miloserdov, P. A.
Karpov, A. V.
Shchukin, A. S.
Sytschev, A. E.
PHYSICS OF METALS AND METALLOGRAPHY, 2019, 120 (05): : 471 - 475

← 1 2 3 4 5 →