Surface modification of polyurethane film using atmospheric pressure plasma

被引：0
|
作者：
Yang, IY [1 ]
Myung, SW [1 ]
Choi, HS [1 ]
Kim, IH [1 ]
机构：
[1] Chungnam Natl Univ, Dept Chem Engn, Taejon 305764, South Korea
来源：
POLYMER-KOREA | 2005年 / 29卷 / 06期
关键词：
atmospheric pressure plasma; polyurethane film; surface free energy; DPPH method; peroxide;
D O I：
暂无
中图分类号：
O63 [高分子化学（高聚物）];
学科分类号：
070305 ; 080501 ; 081704 ;
摘要：
Commercial polyurethane film (PU) was modified with Ar plasma ionized in dielectric barrier discharge (DBD) plate-type reactor under atmospheric pressure. We measured the change of the contact angle and the surface free energy with respect to the plasma treatment conditions such as treatment time, RF-power, and Ar gas flow rate. We also optimized the plasma treatment conditions to maximize the surface peroxide concentration. At the plasma treatment time of 70 sec, the power of 120 W and the Ar gas flow rate of 5 liter per minute (LPM), the best wettability and the highest surface free energy were obtained. The 1,1-diphenyl-2-picrylhydrazyl (DPPH) method confirmed that the surface peroxide concentration was about 2.1 nmol/cm(2) at 80 W, 30 sec, 6 LPM.
引用
收藏
页码：581 / 587
页数：7
相关论文
共 50 条
  • [41] Characterization of the surface changes and the aging effects of low-pressure nitrogen plasma treatment in a polyurethane film
    Sanchis, M. R.
    Calvo, O.
    Fenollar, O.
    Garcia, D.
    Balart, R.
    POLYMER TESTING, 2008, 27 (01) : 75 - 83
  • [42] Synthesis and Characterization of Organic Thin Film Using Atmospheric-Pressure Plasma Polymerization
    Aizawa, Hidenobu
    Gokita, Yasutoshi
    Yoshimi, Yasuo
    Hatta, Tamao
    Reddy, Subrayal M.
    Kurosawa, Shigeru
    SENSORS AND MATERIALS, 2010, 22 (07) : 337 - 345
  • [43] DEPOSITION OF POLYMER FILMS ON ALUMINIUM SURFACE USING ATMOSPHERIC-PRESSURE PLASMA
    Bonova, Lucia
    Zahoranova, Anna
    Kovacik, Dusan
    Cernak, Mirko
    CHEMICKE LISTY, 2012, 106 : S1431 - S1434
  • [44] Surface treatment of steel using non-equilibrium plasma at atmospheric pressure
    Kiyokawa, K
    Itou, A
    Matsuoka, H
    Tomimatsu, M
    Sugiyama, K
    THIN SOLID FILMS, 1999, 345 (01) : 119 - 123
  • [45] Organic materials surface hydrophilic control using atmospheric pressure plasma jets
    Mukaigawa, Seiji
    Ito, Hiroshi
    Nawa, Kota
    Kita, Noriyuki
    Takaki, Koichi
    Fujiwara, Tamiya
    TRANSACTIONS OF THE MATERIALS RESEARCH SOCIETY OF JAPAN, VOL 33, NO 3, 2008, 33 (03): : 679 - 682
  • [46] Polythiophene nanostructure film deposited using a bump electrode in atmospheric pressure plasma polymerization for increased film uniformity
    Kim, Jae Young
    Jang, Sebinn
    Jang, Hyojun
    Nam, Jeongbin
    Suleiman, Habeeb Olaitan
    Jung, Eun Young
    Park, Choon-Sang
    Tae, Heung-Sik
    CURRENT APPLIED PHYSICS, 2025, 71 : 152 - 162
  • [47] Surface treatment for Cu metallization on polyimide film by atmospheric pressure dielectric barrier discharge plasma system
    Cho, Sang-Jin
    Shrestha, Shankar Prasad
    Boo, Jin-Hyo
    CURRENT APPLIED PHYSICS, 2011, 11 (05) : S135 - S139
  • [48] Atmospheric pressure plasma treatment of flat aluminum surface
    Bonova, Lucia
    Zahoranova, Anna
    Kovacik, Dusan
    Zahoran, Miroslav
    Micusik, Matej
    Cernak, Mirko
    APPLIED SURFACE SCIENCE, 2015, 331 : 79 - 86
  • [49] Surface treatment and characterization of ITO thin films using atmospheric pressure plasma for organic light emitting diodes
    Jung, Mi-Hee
    Choi, Ho-Suk
    JOURNAL OF COLLOID AND INTERFACE SCIENCE, 2007, 310 (02) : 550 - 558
  • [50] A New Stripline-Based Atmospheric Pressure Microwave Plasma Sheet Source Designed for Surface Modification of Materials
    Nowakowska, Helena
    Czylkowski, Dariusz
    Hrycak, Bartosz
    Jasinski, Mariusz
    MATERIALS, 2021, 14 (23)
12345