Multi-Objective Optimization Model of CNC Machining to Minimize Processing Time and Environmental Impact

被引：1
作者：
Hamada, Aulia [1 ]
Rosyidi, Cucuk Nur [1 ]
Jauhari, Wakhid Ahmad [1 ]
机构：
[1] Sebelas Maret Univ, Dept Ind Engn, Fac Engn, Surakarta, Indonesia
来源：
3RD INTERNATIONAL MATERIALS, INDUSTRIAL AND MANUFACTURING ENGINEERING CONFERENCE (MIMEC2017) | 2017年 / 1902卷
关键词：
D O I：
10.1063/1.5010653
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
Minimizing processing time in a production system can increase the efficiency of a manufacturing company. Processing time are influenced by application of modern technology and machining parameter. Application of modern technology can be apply by use of CNC machining, one of the machining process can be done with a CNC machining is turning. However, the machining parameters not only affect the processing time but also affect the environmental impact. Hence, optimization model is needed to optimize the machining parameters to minimize the processing time and environmental impact. This research developed a multi-objective optimization to minimize the processing time and environmental impact in CNC turning process which will result in optimal decision variables of cutting speed and feed rate. Environmental impact is converted from environmental burden through the use of eco-indicator 99. The model were solved by using OptQuest optimization software from Oracle Crystal Ball.
引用
收藏
页数：7
相关论文
共 50 条
[41]   Multi-objective cutting parameter optimization model of multi-pass turning in CNC machines for sustainable manufacturing [J].
Pangestu, Phengky ;
Pujiyanto, Eko ;
Rosyidi, Cucuk Nur .
HELIYON, 2021, 7 (02)
[42]   Multi-Objective Electric Truck Path Optimization Model with Time Window [J].
Qi Yuanhao ;
Huang Yinuo ;
Ye Yuanyuan ;
Wang Wanli ;
Fu Yaping ;
Wang Kai .
2019 4TH INTERNATIONAL CONFERENCE ON CONTROL, ROBOTICS AND CYBERNETICS (CRC 2019), 2019, :128-132
[43]   Multi-objective optimization of handlebar based on processing map and response surface model [J].
Xia, Yufeng ;
Ji, Shuai ;
Zhang, Yandong ;
Tian, Yongsheng .
Huazhong Keji Daxue Xuebao (Ziran Kexue Ban)/Journal of Huazhong University of Science and Technology (Natural Science Edition), 2015, 43 (03) :63-68
[44]   Time Consistency Issue in Multi-Objective Optimization [J].
Li, Duan ;
Cui, Xiangyu ;
Zhu, Shushang .
JOURNAL OF MULTI-CRITERIA DECISION ANALYSIS, 2011, 18 (1-2) :143-149
[45]   THE OPTIMIZATION OF MACHINING PARAMETERS IN MULTI-OBJECTIVE JOB-SHOP JUST-IN-TIME SCHEDULING [J].
Wang, Shuai ;
Jiang, Renhao ;
Zhao, Na ;
Sun, Yuting .
4TH INTERNATIONAL CONFERENCE ON ADVANCED COMPUTER THEORY AND ENGINEERING ( ICACTE 2011), 2011, :631-635
[46]   A Multi-Objective Optimization Model for Green Supply Chain Considering Environmental Benefits [J].
Jian, Jie ;
Guo, Yu ;
Jiang, Lin ;
An, Yanyan ;
Su, Jiafu .
SUSTAINABILITY, 2019, 11 (21)
[47]   Multi-objective optimization of electro-discharge machining (EDM) parameter for sustainable machining [J].
Mohanty, Uttam Kumar ;
Rana, Jaydev ;
Sharma, Abhay .
MATERIALS TODAY-PROCEEDINGS, 2017, 4 (08) :9147-9157
[48]   A Multi-objective optimization based on adaptive environmental selection [J].
Weng Li-guo ;
Ji, Zhuangzhuang ;
Xia, Min ;
Wang, An .
2013 2ND INTERNATIONAL SYMPOSIUM ON INSTRUMENTATION AND MEASUREMENT, SENSOR NETWORK AND AUTOMATION (IMSNA), 2013, :999-1003
[49]   Environmental and multi-objective optimization of Adaptive Complex Facades [J].
Chi, D. A. ;
Gonzalez, E. .
STRUCTURES AND ARCHITECTURE: A VIABLE URBAN PERSPECTIVE?, 2022, 2 :771-778
[50]   Modular approach to multi-objective environmental optimization of buildings [J].
Kiss, Benedek ;
Szalay, Zsuzsa .
AUTOMATION IN CONSTRUCTION, 2020, 111
12345