Multi-Objective Optimization Model of CNC Machining to Minimize Processing Time and Environmental Impact

被引：1
|
作者：
Hamada, Aulia [1 ]
Rosyidi, Cucuk Nur [1 ]
Jauhari, Wakhid Ahmad [1 ]
机构：
[1] Sebelas Maret Univ, Dept Ind Engn, Fac Engn, Surakarta, Indonesia
来源：
3RD INTERNATIONAL MATERIALS, INDUSTRIAL AND MANUFACTURING ENGINEERING CONFERENCE (MIMEC2017) | 2017年 / 1902卷
关键词：
D O I：
10.1063/1.5010653
中图分类号：
O59 [应用物理学];
学科分类号：
摘要：
Minimizing processing time in a production system can increase the efficiency of a manufacturing company. Processing time are influenced by application of modern technology and machining parameter. Application of modern technology can be apply by use of CNC machining, one of the machining process can be done with a CNC machining is turning. However, the machining parameters not only affect the processing time but also affect the environmental impact. Hence, optimization model is needed to optimize the machining parameters to minimize the processing time and environmental impact. This research developed a multi-objective optimization to minimize the processing time and environmental impact in CNC turning process which will result in optimal decision variables of cutting speed and feed rate. Environmental impact is converted from environmental burden through the use of eco-indicator 99. The model were solved by using OptQuest optimization software from Oracle Crystal Ball.
引用
收藏
页数：7
相关论文
共 50 条
  • [1] Multi-objective Parameter Optimization of Multi-pass CNC Machining
    Chen, Xingzheng
    Tang, Ying
    Li, Congbo
    Yi, Qian
    2015 INTERNATIONAL CONFERENCE ON AUTOMATION SCIENCE AND ENGINEERING (CASE), 2015, : 45 - 50
  • [2] Multi Objective Optimization Model of CNC Turning for Minimizing Processing Time and Carbon Emission with Real Machining Application
    Rosyidi, Cucuk Nur
    Widhiarso, Wahyu
    Pujiyanto, Eko
    JOURNAL OF INDUSTRIAL ENGINEERING AND MANAGEMENT-JIEM, 2021, 14 (02): : 376 - 390
  • [3] Multi-objective parameter optimization of CNC machining for low carbon manufacturing
    Yi, Qian
    Li, Congbo
    Tang, Ying
    Chen, Xingzheng
    JOURNAL OF CLEANER PRODUCTION, 2015, 95 : 256 - 264
  • [4] Multi Objective Optimization Model for Minimizing Production Cost and Environmental Impact in CNC Turning Process
    Widhiarso, Wahyu
    Rosyidi, Cucuk Nur
    3RD INTERNATIONAL CONFERENCE ON INDUSTRIAL, MECHANICAL, ELECTRICAL, AND CHEMICAL ENGINEERING, 2018, 1931
  • [5] Multi-objective optimization of machining parameters to minimize surface roughness and power consumption using TOPSIS
    Pawanr, Shailendra
    Garg, Girish Kant
    Routroy, Srikanta
    7TH CIRP GLOBAL WEB CONFERENCE - TOWARDS SHIFTED PRODUCTION VALUE STREAM PATTERNS THROUGH INFERENCE OF DATA, MODELS, AND TECHNOLOGY (CIRPE 2019), 2019, 86 : 116 - 120
  • [6] Multi-objective optimization of electrochemical machining process
    Sohrabpoor, Hamed
    Khanghah, Saeed Parsa
    Shahraki, Saeid
    Teimouri, Reza
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2016, 82 (9-12): : 1683 - 1692
  • [7] Multi-objective optimization of electrochemical machining process
    Hamed Sohrabpoor
    Saeed Parsa Khanghah
    Saeid Shahraki
    Reza Teimouri
    The International Journal of Advanced Manufacturing Technology, 2016, 82 : 1683 - 1692
  • [8] Multi-objective Optimization of Ms58 Brass Machining Operation by Multi-axis CNC Lathe
    Ömer Seçgin
    Arabian Journal for Science and Engineering, 2021, 46 : 2133 - 2145
  • [9] Multi-objective Optimization of Ms58 Brass Machining Operation by Multi-axis CNC Lathe
    Secgin, Omer
    ARABIAN JOURNAL FOR SCIENCE AND ENGINEERING, 2021, 46 (03) : 2133 - 2145
  • [10] A MULTI-OBJECTIVE OPTIMIZATION MODEL TO MINIMIZE TEMPORARY WORKERS CONSIDERING THE DIFFICULTY OF TASKS
    Kataoka, Takayuki
    Morikawa, Katsumi
    Takahashi, Katsuhiko
    ICIM'2016: PROCEEDINGS OF THE 13TH INTERNATIONAL CONFERENCE ON INDUSTRIAL MANAGEMENT, 2016, : 366 - 373
12345