Feed optimization for five-axis CNC machine tools with drive constraints

被引：205

作者：

Sencer, B. ^{[1
]}

Altintas, Y. ^{[1
]}

Croft, E. ^{[1
]}

机构：

[1] Univ British Columbia, Mfg Automat Lab, Vancouver, BC, Canada

来源：

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE | 2008年 / 48卷 / 7-8期

关键词：

CNC; five axis; feed optimization;

D O I：

10.1016/j.ijmachtools.2008.01.002

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Real time control of five-axis machine tools requires smooth generation of feed, acceleration and jerk in CNC systems without violating the physical limits of the drives. This paper presents a feed scheduling algorithm for CNC systems to minimize the machining time for five-axis contour machining Of Sculptured surfaces. The variation of the feed along the five-axis tool-path is expressed in a cubic B-spline form. The velocity, acceleration and jerk limits of the five axes are considered in finding the most optimal feed along the tool-path in order to ensure smooth and linear operation of the servo drives with minimal tracking error. The time optimal feed motion is obtained by iteratively modulating the feed control points of the B-spline to maximize the feed along the tool-path without violating the programmed feed and the drives' physical limits. Long tool-paths are handled efficiently by applying a moving window technique. The improvement in the productivity and linear operation of the five drives is demonstrated with five-axis simulations and experiments oil a CNC machine tool. (c) 2008 Elsevier Ltd. All rights reserved.

引用

页码：733 / 745

页数：13

共 18 条

[11] High speed servo control of multi-axis machine tools [J].

Renton, D ;

Elbestawi, MA .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 2000, 40 (04) :539-559

[12] COMPUTATION OF PATH CONSTRAINED TIME OPTIMAL MOTIONS WITH DYNAMIC SINGULARITIES [J].

SHILLER, Z ;

LU, HH .

JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 1992, 114 (01) :34-40

[13]

SHIN KG, 1986, IEEE T AUTOMAT CONTR, V31, P491, DOI 10.1109/TAC.1986.1104317

[14] MINIMUM-TIME CONTROL OF RBOTIC MANIPULATORS WITH GEOMETRIC PATH CONSTRAINTS. [J].

Shin, Kang G. ;

McKay, Neil D. .

IEEE Transactions on Automatic Control, 1985, AC-30 (06) :531-541

[15]

TARKIAINEN M, 1993, IEEE C ROB AUT ATL G, P725

[16] Algorithms for time-optimal control of CNC machines along curved tool paths [J].

Timar, SD ;

Farouki, RT ;

Smith, TS ;

Boyadjieff, CL .

ROBOTICS AND COMPUTER-INTEGRATED MANUFACTURING, 2005, 21 (01) :37-53

[17]

WEEK M, 1999, ANN GERMAN ACAD SOC, V6, P83

[18]

[No title captured]

← 1 2 →