Optimization of HIP bonding conditions for ITER shielding blanket first wall made from austenitic stainless steel and dispersion strengthened copper alloy

被引：36

作者：

Sato, S ^{[1
]}

Hatano, T ^{[1
]}

Kuroda, T ^{[1
]}

Furuya, K ^{[1
]}

Hara, S ^{[1
]}

Enoeda, M ^{[1
]}

Takatsu, H ^{[1
]}

机构：

[1] Japan Atom Energy Res Inst, Naka Fus Res Estab, Dept Fus Engn Res, Naka, Ibaraki 31101, Japan

来源：

JOURNAL OF NUCLEAR MATERIALS | 1998年 / 258卷

关键词：

D O I：

10.1016/S0022-3115(98)00360-2

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

Optimum bonding conditions were studied on the Hot Isostatic Pressing (HIP) bonded joints of type 316L austenitic stainless steel and Dispersion Strengthened Copper alloy (DSCu) for application to the ITER shielding blanket/first wall. HIP bonded joints were fabricated at temperatures in a 980-1050 degrees C range, and a series of mechanical tests and metallurgical observations were conducted on the joints. Also, bondability of two grades of DSCu (Glidcop Al-25(R) and Al-15(R)) with SS316L was examined in terms of mechanical properties of the HIP bonded joints. From those studies it was concluded that the HIP temperature of 1050 degrees C was an optimal condition for obtaining higher ductility, impact values and fatigue strength. Also, SS316L/A1-15 joints showed better results in terms of ductility and impact values compared with SS316L/A1-25 joints. (C) 1998 Elsevier Science B.V. All rights reserved.

引用

页码：265 / 270

页数：6

共 8 条

[1]

FURUYA K, 1996, P 19 S FUS TECH LISB

[2]

HASHIMOTO T, 1994, JAERITECH949009

[3]

IOKI K, 1996, P 19 S FUS TECH LISB

[4]

MOHRI K, 1995, FUSION ENG DES, V27, P438

[5] Mechanical properties of HIP bonded joints of austenitic stainless steel and Cu-alloy for fusion experimental reactor blanket [J].

Sato, S ;

Kuroda, T ;

Kurasawa, T ;

Furuya, K ;

Togami, I ;

Takatsu, H .

JOURNAL OF NUCLEAR MATERIALS, 1996, 233 :940-944

[6]

SATO S, 1997, P 4 INT S FUS NUCL T

[7]

SATO S, 1995, P 16 S FUS ENG CHAMP

[8]

SATO S, 1993, P 15 S FUS ENG CAP C

← 1 →