Impact of processing parameters and post-treatment on the shape accuracy of 3D-printed baking dough

被引:68
作者
Yang, Fan [1 ]
Zhang, Min [1 ,2 ]
Fang, Zhongxiang [3 ]
Liu, Yaping [4 ]
机构
[1] Jiangnan Univ, State Key Lab Food Sci & Technol, Wuxi, Jiangsu, Peoples R China
[2] Jiangnan Univ, Jiangsu Prov Key Lab Adv Food Mfg Equipment & Tec, Wuxi, Jiangsu, Peoples R China
[3] Univ Melbourne, Fac Vet & Agr Sci, Parkville, Vic, Australia
[4] Guangdong Galore Food Co Ltd, Zhongshan, Peoples R China
关键词
3D printing; processing parameters; post-process fast-cooling; modelling effect; rheological properties; 3D PRINTING TECHNOLOGIES; PHYSICAL-PROPERTIES; DEPOSITION; VARIABLES;
D O I
10.1111/ijfs.13904
中图分类号
TS2 [食品工业];
学科分类号
0832 ;
摘要
Apart from the material compositions, processing parameters of a 3D printer also affect the modelling effect of printed samples. This paper presents the influence of processing parameters including filament diameter (2.10, 2.30, 2.50 mm), nozzle movement speed (20, 25, 30 mm/s), nozzle diameter (0.8, 1.5, 2.0 mm) and nozzle height (2.10, 2.40, 2.60 mm), as well as that of post-process fast-cooling (-65 degrees C; 0, 5, 10 min), on the rheological properties and geometric accuracy of a 3D-printed food construct made of baking dough (BD). Results showed that the printed object whose shape best matched the target geometry could be obtained with the following processing parameters: filament diameter of 2.30 mm, nozzle movement speed of 25 mm/s, nozzle diameter of 2.0 mm and nozzle height of 2.40 mm during 3D printing, combined with fast-cooling at -65 degrees C for more than 10 min after printing and before baking.
引用
收藏
页码:68 / 74
页数:7
相关论文
共 19 条
[1]   Critical parameters influencing the quality of prototypes in fused deposition modelling [J].
Anitha, R ;
Arunachalam, S ;
Radhakrishnan, P .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 118 (1-3) :385-388
[2]   Fabrication and characterization of gels with integrated channels using 3D printing with microfluidic nozzle for tissue engineering applications [J].
Attalla, R. ;
Ling, C. ;
Selvaganapathy, P. .
BIOMEDICAL MICRODEVICES, 2016, 18 (01) :1-12
[3]   Hydrogels for tissue engineering: scaffold design variables and applications [J].
Drury, JL ;
Mooney, DJ .
BIOMATERIALS, 2003, 24 (24) :4337-4351
[4]   Experimental study aiming to enhance the surface finish of fused deposition modeled parts [J].
Galantucci, L. M. ;
Lavecchia, F. ;
Percoco, G. .
CIRP ANNALS-MANUFACTURING TECHNOLOGY, 2009, 58 (01) :189-192
[5]   3d printing technologies applied for food design: Status and prospects [J].
Godoi, Fernanda C. ;
Prakash, Sangeeta ;
Bhandari, Bhesh R. .
JOURNAL OF FOOD ENGINEERING, 2016, 179 :44-54
[6]   Material characterisation and process development for chocolate additive layer manufacturing [J].
Hao, L. ;
Mellor, S. ;
Seaman, O. ;
Henderson, J. ;
Sewell, N. ;
Sloan, M. .
VIRTUAL AND PHYSICAL PROTOTYPING, 2010, 5 (02) :57-64
[7]   Biopolyrner deposition for freefonn fabrication of hydrogel tissue constructs [J].
Khalil, Saif ;
Sun, Wei .
MATERIALS SCIENCE & ENGINEERING C-BIOMIMETIC AND SUPRAMOLECULAR SYSTEMS, 2007, 27 (03) :469-478
[8]   Physical properties and microstructures of nanocrystals reinforced ice laser 3D print layer [J].
Li, Jia-Ning ;
Liu, Ke-Gao ;
Gong, Shui-Li ;
Zhang, Yuan-Bin ;
Liu, Peng .
PHYSICA E-LOW-DIMENSIONAL SYSTEMS & NANOSTRUCTURES, 2015, 66 :317-320
[9]  
Lipton J., 2010, SOL FREEF FABR UNPUB
[10]   Rheology of Gluten-Free Doughs from Blends of Chestnut and Rice Flours [J].
Moreira, Ramon ;
Chenlo, Francisco ;
Torres, Maria D. .
FOOD AND BIOPROCESS TECHNOLOGY, 2013, 6 (06) :1476-1485