Behavior of cement-stabilized clay reinforced with nylon fiber

被引:123
作者
Estabragh, A. R. [1 ]
Namdar, P. [1 ]
Javadi, A. A. [2 ]
机构
[1] Univ Tehran, Fac Soil & Water Engn, Karaj 3158777871, Iran
[2] Univ Exeter, Coll Engn Math & Phys Sci, Computat Geomech Grp, Exeter EX4 4QF, Devon, England
关键词
Geosynthetics; Reinforced soil; Cement-stabilized soil; Clay; Fiber; Unconfined compression test; FLY-ASH; SOIL; STRENGTH;
D O I
10.1680/gein.2012.19.1.85
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
A series of experiments were carried out to investigate the behavior of cementstabilized fiber-reinforced clay with different cement and fiber contents. Three groups of tests were conducted, on: (1) reinforced samples with four different fiber contents (0.5%, 0.75%, 1% and 1.25%); (2) cement-stabilized samples with three different cement contents (5%, 8% and 10%); and (3) cement-stabilized, fiber-reinforced samples with the same fiber contents as the uncemented reinforced samples. Unconfined compression tests (UCT) were carried out on the uncemented samples. These UCT tests were also conducted on the cement-stabilized samples with and without fiber inclusions after 3, 7, 14 and 28 days of curing time. The results indicated that the inclusion of fibers within uncemented and cement-stabilized soil caused an increase in the unconfined compressive strength and axial strain at failure, and changed the brittle behavior of the cement-stabilized soil to a more ductile behavior. It was also shown that the mechanical characteristics of the soil-cement-fiber mixtures are functions of fiber content and curing time.
引用
收藏
页码:85 / 92
页数:8
相关论文
共 42 条
[1]   Microfabric and mineralogical studies on the stabilization of an expansive soil using cement by-pass dust and some types of slags [J].
Al-Rawas, AA .
CANADIAN GEOTECHNICAL JOURNAL, 2002, 39 (05) :1150-1167
[2]  
[Anonymous], 1990, ACI MATER J, V87, P395
[3]  
[Anonymous], D2487 ASTM INT
[4]  
[Anonymous], D6980 ASTM INT
[5]  
[Anonymous], D427 ASTM INT
[6]  
[Anonymous], C109 ASTM INT
[7]  
[Anonymous], D2101 ASTM INT
[8]  
[Anonymous], D698 ASTM INT
[9]  
[Anonymous], D1632 ASTM INT
[10]  
[Anonymous], C190 ASTM INT