The effect of the thermo-mechanical processing on the properties of some Al-Fe-Si alloys with high Fe/Si ratio

被引：2
作者：
Delijic, K. [1 ]
Asanovic, V. [1 ]
Radonjic, D. [1 ]
机构：
[1] Univ Montenegro, Fac Technol & Met, Podgorica, Montenegro
来源：
RESEARCH TRENDS IN CONTEMPORARY MATERIALS SCIENCE | 2007年 / 555卷
关键词：
Al-Fe-Si sheets; high Fe/Si ratio; mechanical and corrosion properties; thermomechanical processing;
D O I：
10.4028/www.scientific.net/MSF.555.559
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper deals with the effects of thermo-mechanical processing parameters on the properties of two Al-Fe-Si foil alloys. Two twin roll cast alloys with high Fe/Si ratios (Fe/Si approximate to 6) were processed under different combinations of homogenization, deformation and annealing treatments. The influence of small additions of manganese on the mechanical behavior and plastic anisotropy of sheets in hardening and annealing conditions are described. The corrosion resistance of tested sheets in chloride ambience is also presented, because this type of Al foils is dominantly used in the packaging (food) industry and heat exchangers.
引用
收藏
页码：559 / +
页数：2
相关论文
共 49 条
[31]   Effect of Thermo-Mechanical Treatment on the Interface Microstructure and Mechanical Properties of a STS-Al-Mg 3-ply Plate [J].
Kim, Jung-Su ;
Lee, Kwang Seok ;
Kwon, Yong-Nam ;
Lee, Young-Seon ;
Lee, Sunghak ;
Chang, Young Won .
KOREAN JOURNAL OF METALS AND MATERIALS, 2013, 51 (07) :547-556
[32]   Investigation of the Effect of the Thermo-Mechanical Processing of Additively Manufactured CoCrFeNiAl0.4 High-Entropy Alloy [J].
Li, Qiang ;
Chen, Xizhang ;
Zhang, Jian ;
Jayalakshmi, Subramanian ;
Singh, Ramachandra Arvind .
ADVANCED ENGINEERING MATERIALS, 2022, 24 (09)
[33]   Effect of High Strain-Rate Thermomechanical Processing on Microstructure and Mechanical Properties of Ti-10V-2Fe-3Al Alloy [J].
Skubisz, P. ;
Packo, M. ;
Mordalska, K. ;
Skowronek, T. .
MATERIALS, INDUSTRIAL, AND MANUFACTURING ENGINEERING RESEARCH ADVANCES 1.1, 2014, 845 :96-100
[34]   GRAIN REFINEMENT IN Ti-6Al-4V ALLOY DURING THERMO-MECHANICAL PROCESSING AND INVESTIGATION OF FLOW PROPERTIES [J].
Sheed, Digvijay J. ;
Kashyap, Bhagawati P. ;
Singh, Rajkumar P. .
TMS 2014 SUPPLEMENTAL PROCEEDINGS, 2014, :93-100
[35]   Evolution of microstructure and texture during thermo-mechanical processing of a two phase Al0.5CoCrFeMnNi high entropy alloy [J].
Wani, I. S. ;
Sathiaraj, G. Dan ;
Ahmed, M. Z. ;
Reddy, S. R. ;
Bhattacharjee, P. P. .
MATERIALS CHARACTERIZATION, 2016, 118 :417-424
[36]   Studying the Effect of Cold Rolling and Heat Treatment on the Microstructure and Mechanical Properties of the Fe36Mn20Ni20Cr16Al5Si3 High Entropy Alloy [J].
Mahmoud, Essam R. I. ;
Shaharoun, Awaludin ;
Gepreel, Mohamed A. ;
Ebied, Saad .
ENTROPY, 2022, 24 (08)
[37]   Re-examination of the effect of NbC precipitation on shape memory in Fe-Mn-Si-based alloys [J].
Stanford, N. ;
Dunne, D. P. ;
Li, H. .
SCRIPTA MATERIALIA, 2008, 58 (07) :583-586
[38]   Effect of Cold Rolling and Heat Treatment on Microstructures and Mechanical Properties in Ti-13Cr-1Fe-3Al Alloys [J].
Takasaki, Yuji ;
Ueda, Masato ;
Ikeda, Masahiko .
TI-2011: PROCEEDINGS OF THE 12TH WORLD CONFERENCE ON TITANIUM, VOL I, 2012, :577-579
[39]   Effect of high strain rate beta processing on microstructure and mechanical properties of near- titanium alloy Ti-10V-2Fe-3Al [J].
Skubisz, P. ;
Lisiecki, L. ;
Packo, M. ;
Skowronek, T. ;
Micek, P. ;
Tokarski, T. .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART L-JOURNAL OF MATERIALS-DESIGN AND APPLICATIONS, 2018, 232 (03) :181-190
[40]   Enhanced thermo-mechanical processing through stress-induced martensitic transformation and its effect on grain refinement in metastable fl titanium alloys [J].
Rastogi, Abhishek ;
Neelakantan, Suresh .
SCRIPTA MATERIALIA, 2023, 226
12345