The effect of the thermo-mechanical processing on the properties of some Al-Fe-Si alloys with high Fe/Si ratio

被引：2
作者：
Delijic, K. [1 ]
Asanovic, V. [1 ]
Radonjic, D. [1 ]
机构：
[1] Univ Montenegro, Fac Technol & Met, Podgorica, Montenegro
来源：
RESEARCH TRENDS IN CONTEMPORARY MATERIALS SCIENCE | 2007年 / 555卷
关键词：
Al-Fe-Si sheets; high Fe/Si ratio; mechanical and corrosion properties; thermomechanical processing;
D O I：
10.4028/www.scientific.net/MSF.555.559
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The paper deals with the effects of thermo-mechanical processing parameters on the properties of two Al-Fe-Si foil alloys. Two twin roll cast alloys with high Fe/Si ratios (Fe/Si approximate to 6) were processed under different combinations of homogenization, deformation and annealing treatments. The influence of small additions of manganese on the mechanical behavior and plastic anisotropy of sheets in hardening and annealing conditions are described. The corrosion resistance of tested sheets in chloride ambience is also presented, because this type of Al foils is dominantly used in the packaging (food) industry and heat exchangers.
引用
收藏
页码：559 / +
页数：2
相关论文
共 50 条
[21]   The effect of Mg treatment on the properties of Al-8.3Fe-0.8V-0.9Si alloy [J].
Sahoo, KL ;
Sivaramakrishnan, CS ;
Chakrabarti, AK .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 112 (01) :6-11
[22]   Effects of Thermomechanical Processing on the Microstructure and Mechanical Properties of Fe-Based Alloys [J].
Popa, Mihai ;
Mihalache, Elena ;
Cojocaru, Vasile Danut ;
Gurau, Carmela ;
Gurau, Gheorghe ;
Cimpoesu, Nicanor ;
Pricop, Bogdan ;
Comaneci, Radu-Ioachim ;
Vollmer, Malte ;
Krooss, Philipp ;
Niendorf, Thomas ;
Bujoreanu, Leandru-Gheorghe .
JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, 2020, 29 (04) :2274-2282
[23]   Effects of Thermomechanical Processing on the Microstructure and Mechanical Properties of Fe-Based Alloys [J].
Mihai Popa ;
Elena Mihalache ;
Vasile Dănuţ Cojocaru ;
Carmela Gurău ;
Gheorghe Gurău ;
Nicanor Cimpoeşu ;
Bogdan Pricop ;
Radu-Ioachim Comăneci ;
Malte Vollmer ;
Philipp Krooß ;
Thomas Niendorf ;
Leandru-Gheorghe Bujoreanu .
Journal of Materials Engineering and Performance, 2020, 29 :2274-2282
[24]   Microstructural evolution and mechanical properties of 2195 Al-Li alloy processed by rapid solidification and thermo-mechanical processing [J].
Lv, Pinhui ;
Wang, Richu ;
Peng, Chaoqun ;
Cai, Zhiyong .
JOURNAL OF ALLOYS AND COMPOUNDS, 2023, 948
[25]   Microstructure and properties of Cu-11Fe-6Ag in situ composite after thermo-mechanical treatments [J].
Gao, Haiyan ;
Wang, Jun ;
Shu, Da ;
Sun, Baode .
JOURNAL OF ALLOYS AND COMPOUNDS, 2007, 438 (1-2) :268-273
[26]   Effect of thermo-mechanical processing on quench-induced precipitates morphology and mechanical properties in high strength AA7075 aluminum alloy [J].
Scharifi, E. ;
Savaci, U. ;
Kavaklioglu, Z. B. ;
Weidig, U. ;
Turan, S. ;
Steinhoff, K. .
MATERIALS CHARACTERIZATION, 2021, 174
[27]   Improved thermo-mechanical processing for effective grain refinement of high-strength AA 7050 Al alloy [J].
Huo, Wangtu ;
Hou, Longgang ;
Lang, Yujing ;
Cui, Hua ;
Zhuang, Linzhong ;
Zhang, Jishan .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2015, 626 :86-93
[28]   Tailoring nanostructures and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy using thermo-mechanical processing [J].
Wani, I. S. ;
Bhattacharjee, T. ;
Sheikh, S. ;
Bhattacharjee, P. P. ;
Guo, S. ;
Tsuji, N. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 675 :99-109
[29]   Effect of an improved multistage thermo-mechanical processing on microstructure and mechanical property of TiB2/Al-Cu composites [J].
Chen, Songyi ;
Chen, Shaoxuan ;
Wang, Dengbiao ;
Chen, Kanghua .
MATERIALS SCIENCE AND TECHNOLOGY, 2025, 41 (12) :877-886
[30]   Coordinated deformation and high formability mechanisms of Al-Zn-Mg-Si-Fe-Mn-Cu alloys with heterogeneous cellular structure [J].
Chen, Xiangyang ;
Guo, Mingxing ;
Qiao, Dexian ;
Liu, Linkun ;
Yu, Kangcai ;
Zhuang, Linzhong .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2022, 848
12345