Evaluation of drilling parameters on thrust force in drilling carbon fiber reinforced plastic (CFRP) composite laminates using compound core-special drills

Drilling is the mostly used secondary machining of the fiber reinforced composite laminates, while the delamination occurs frequently at the drill exit in the workpiece. In the industrial experiences, core drill shows better drilling quality than twist drill. However, chip removal is a troublesome problem when using the core drill. Conventional compound core-special drills (core-special drills and step-core-special drills) are designed to avoid the chip removal clog in drilling. But the cutting velocity ratio (relative motion) between outer drill and inner drill is null for conventional compound core-special drills. The current study develops a new device and to solve the problems of relative motion and chip removal between the outer and inner drills in drilling CFRP composite laminates. In addition, this study investigates the influence of drilling parameters (cutting velocity ratio, feed rate, stretch, inner drill type and inner drill diameter) on thrust force of compound core-special drills. An innovative device can be consulted in application of compound core-special drill in different industries in the future. (C) 2011 Elsevier Ltd. All rights reserved.