Surface modification of cemented carbide cutting tools for improved adhesion of diamond coatings

被引：20

作者：

Tonshoff, HK ^{[1
]}

Mohlfeld, A ^{[1
]}

Gey, C ^{[1
]}

Winkler, J ^{[1
]}

机构：

[1] Univ Hannover, Inst Fertigungstech & Spanende Werkzeugmaschinen, D-30159 Hannover, Germany

来源：

SURFACE & COATINGS TECHNOLOGY | 1998年 / 108卷 / 1-3期

关键词：

diamond coatings; film adhesion; cemented carbides;

D O I：

10.1016/S0257-8972(98)00634-3

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Diamond coatings are mainly used in cutting processes due to their tribological characteristics. They show a high hardness, a low friction coefficient, high wear resistance and a good chemical inertness. In relation to polycrystalline diamond (PCD)-tipped cutting inserts especially the advantageous chemical stability of diamond coatings is superior as no binder phases between diamond grains are used. However, the deposition of adherent high quality diamond coatings has been found difficult. Thus, substrate pretreatment is utilized to improve film adhesion. This investigation is based on water peening of the substrate material before coating. The investigation revealed best results for diamond film adhesion on pretreated substrates compared to conventional diamond coatings on cemented carbide tools applied with the CVD hot-filament process. In final cutting tests with increased film adhesion water-peened cutting tools an improved wear behavior was detected. (C) 1998 Elsevier Science S.A. All rights reserved.

引用

页码：543 / 550

页数：8

共 7 条

[1] Pretreatment of substrate surface for improved adhesion of diamond films on hard metal cutting tools [J].

Deuerler, F ;

vandenBerg, H ;

Tabersky, R ;

Freundlieb, A ;

Pies, M ;

Buck, V .

[2]

KROOS F, 1995, THESIS HANNOVER

[3] INDUSTRIAL APPLICATION OF CRYSTALLINE DIAMOND-COATED TOOLS [J].

LEYENDECKER, T ;

LEMMER, O ;

JURGENS, A ;

ESSER, S ;

EBBERINK, J .

SURFACE & COATINGS TECHNOLOGY, 1991, 48 (03) :253-260

[4] Diamond coated cutting tools [J].

Reineck, I ;

Sjostrand, ME ;

Karner, J ;

Pedrazzini, M .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 1996, 14 (1-3) :187-193

[5] The influence of tool coatings in machining of magnesium [J].

Tonshoff, HK ;

Winkler, J .

SURFACE & COATINGS TECHNOLOGY, 1997, 94-5 (1-3) :610-616

[6]

YANAIDA K, 1974, 2 INT S JET CUTT TEC

[7] INVESTIGATION OF ADHESION OF DIAMOND FILMS ON MO, W AND CARBURIZED W SUBSTRATES [J].

ZHU, W ;

MCCUNE, RC ;

DEVRIES, JE ;

TAMOR, MA ;

NG, KYS .

← 1 →