Weld formation mechanism of fiber laser oscillating welding of austenitic stainless steel

被引：102

作者：

Hao, Kangda ^{[1
]}

Li, Geng ^{[1
]}

Gao, Ming ^{[1
]}

Zeng, Xiaoyan ^{[1
]}

机构：

[1] Huazhong Univ Sci & Technol, Wuhan Natl Lab Optoelect, Wuhan 430074, Peoples R China

来源：

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2015年 / 225卷

基金：

中国国家自然科学基金;

关键词：

Laser welding; Oscillating; Morphology; Welding mode; Stainless steel; JOINTS; ALLOY; BEAM;

D O I：

10.1016/j.jmatprotec.2015.05.021

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The effects of beam oscillating parameters on weld morphologies are investigated. Weld geometrical sizes were counted statistically. The results showed that the difference in cross-section width from the top to the lower gradually reduced to disappear with the increase of oscillating frequency. Weld cross-section was featured by slender nail when the frequency was 10 Hz or so, which was similar with conventional laser keyhole weld. It changed to dumpy nail, V-shape and U-shape in sequence with the increase of the frequency within the range from 20 Hz to 1000 Hz. The welding speed thresholds transforming the welding from keyhole mode to unstable mode and from unstable mode to heat conduction mode were confirmed as 24 m/min and 48 m/min, respectively. Weld formation mechanisms were summarized by weld overlapping ratio and the transformation of welding mode. (C) 2015 Elsevier B.V. All rights reserved.

引用

页码：77 / 83

页数：7

共 50 条

[21] Laser power coupling efficiency in conduction and keyhole welding of austenitic stainless steel
Nath, AK
Sridhar, R
Ganesh, P
Kaul, R
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES, 2002, 27 (3): : 383 - 392
[22] Determination of plasticity following deformation and welding of austenitic stainless steel
Acar, Murat O.
Fitzpatrick, Michael E.
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2017, 701 : 203 - 213
[23] Defocusing techniques for multi-pass laser welding of austenitic stainless steel
Karhu, Miikka
Kujanpaa, Veli
15TH NORDIC LASER MATERIALS PROCESSING CONFERENCE, NOLAMP 15, 2015, 78 : 53 - 64
[24] Study on laser welding of austenitic stainless steel by varying incident angle of pulsed laser beam
Kumar, Nikhil
Mukherjee, Manidipto
Bandyopadhyay, Asish
OPTICS AND LASER TECHNOLOGY, 2017, 94 : 296 - 309
[25] Formation of strain-induced martensite in selective laser melting austenitic stainless steel
Hong, Yuanjian
Zhou, Chengshuang
Zheng, Yuanyuan
Zhang, Lin
Zheng, Jinyang
Chen, Xingyang
An, Bai
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2019, 740 : 420 - 426
[26] Weld formation mechanism during fiber laser welding of aluminum alloys with focus rotation and vertical oscillation
Wu, Q.
Xiao, R. S.
Zou, J. L.
Xu, J. J.
JOURNAL OF MANUFACTURING PROCESSES, 2018, 36 : 149 - 154
[27] Experimental study and finite volume modeling of keyhole dynamics, temperature distribution and weld characteristics in laser welding of austenitic stainless steel tube
Zhang, Guilin
Arshad, Noreen Izza
Zhang, Peng
Hazaimeh, Haziem M.
Alqahtani, Aisha M.
Kraiem, Naoufel
OPTICS AND LASER TECHNOLOGY, 2025, 183
[28] A study on the mechanism of serrated grain boundary formation in an austenitic stainless steel
Kim, K. J.
Hong, H. U.
Nam, S. W.
MATERIALS CHEMISTRY AND PHYSICS, 2011, 126 (03) : 480 - 483
[29] Studies on characteristics of CO2 laser-GTAW hybrid welding of austenitic stainless steel
Kaul, Rakesh
Kumar, Harish
Rao, B. T.
Kukreja, L. M.
Singh, Nageshwar
Vora, H. S.
JOURNAL OF LASER APPLICATIONS, 2010, 22 (02) : 79 - 85
[30] High strength welding of Ti to stainless steel by spot impact: microstructure and weld performance
Li, Jianxiong
Schneiderman, Benjamin
Song, Shaopin
Gilbert, Sarah M.
Vivek, Anupam
Yu, Zhenzhen
Dong, Pingsha
Daehn, Glenn S.
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2020, 108 (5-6) : 1447 - 1461

← 1 2 3 4 5 →