Weld formation mechanism of fiber laser oscillating welding of austenitic stainless steel

被引：105
作者：
Hao, Kangda [1 ]
Li, Geng [1 ]
Gao, Ming [1 ]
Zeng, Xiaoyan [1 ]
机构：
[1] Huazhong Univ Sci & Technol, Wuhan Natl Lab Optoelect, Wuhan 430074, Peoples R China
来源：
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY | 2015年 / 225卷
基金：
中国国家自然科学基金;
关键词：
Laser welding; Oscillating; Morphology; Welding mode; Stainless steel; JOINTS; ALLOY; BEAM;
D O I：
10.1016/j.jmatprotec.2015.05.021
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
The effects of beam oscillating parameters on weld morphologies are investigated. Weld geometrical sizes were counted statistically. The results showed that the difference in cross-section width from the top to the lower gradually reduced to disappear with the increase of oscillating frequency. Weld cross-section was featured by slender nail when the frequency was 10 Hz or so, which was similar with conventional laser keyhole weld. It changed to dumpy nail, V-shape and U-shape in sequence with the increase of the frequency within the range from 20 Hz to 1000 Hz. The welding speed thresholds transforming the welding from keyhole mode to unstable mode and from unstable mode to heat conduction mode were confirmed as 24 m/min and 48 m/min, respectively. Weld formation mechanisms were summarized by weld overlapping ratio and the transformation of welding mode. (C) 2015 Elsevier B.V. All rights reserved.
引用
收藏
页码：77 / 83
页数：7
相关论文
共 12 条
[1]   Weld strength improvement for Al alloy by using laser weaving method [J].
Choi, Kwang-Deok ;
Ahn, Young-Nam ;
Kim, Cheolhee .
JOURNAL OF LASER APPLICATIONS, 2010, 22 (03) :116-119
[2]   Melt pool and keyhole behaviour analysis for deep penetration laser welding [J].
Fabbro, R. .
JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2010, 43 (44)
[3]  
Katayama S., 2013, HDB LASER WELDING TE, P341
[4]   Effects of Weaving Laser on Weld Microstructure and Crack for Al 6k21-T4 Alloy [J].
Kim, B. H. ;
Kang, N. H. ;
Oh, W. T. ;
Kim, C. H. ;
Kim, J. H. ;
Kim, Y. S. ;
Park, Y. H. .
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY, 2011, 27 (01) :93-96
[5]   Welding of die-casted magnesium alloys for production [J].
Lehner, C ;
Reinhart, G ;
Schaller, L .
JOURNAL OF LASER APPLICATIONS, 1999, 11 (05) :206-210
[6]   Porosity formation mechanism and its prevention in laser lap welding for T-joints [J].
Meng, Wei ;
Li, Zhuguo ;
Lu, Fenggui ;
Wu, Yixiong ;
Chen, Jianhong ;
Katayama, Seiji .
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2014, 214 (08) :1658-1664
[7]   Advantages of using an oscillating laser beam for the production of tailored blanks [J].
Rubben, K ;
Mohrbacher, H ;
Leirman, E .
LASERS IN MATERIAL PROCESSING, 1997, 3097 :228-241
[8]  
Schedewy R., 2008, LASER MAT PROCESSING, P609
[9]   Spatter formation in laser welding with beam oscillation [J].
Schweier, M. ;
Heins, J. F. ;
Haubold, M. W. ;
Zaeh, M. F. .
LASERS IN MANUFACTURING (LIM 2013), 2013, 41 :20-30
[10]  
Schweier M, 2011, INT LASER SAFETY C, P536
12