Numerical calculation of the drag force applied to particle pushing

被引:13
|
作者
Agaliotis, E. [1 ,2 ]
Rosenberger, M. R. [1 ,2 ]
Schvezov, C. E. [1 ,2 ]
Ares, A. E. [1 ,2 ]
机构
[1] Univ Nacl Misiones, FCEQyN, RA-3300 Posadas, Misiones, Argentina
[2] Consejo Nacl Invest Cient & Tecn, RA-1033 Buenos Aires, DF, Argentina
关键词
computer simulation; fluid flows; interfaces; particles; solidification;
D O I
10.1016/j.jcrysgro.2007.11.188
中图分类号
O7 [晶体学];
学科分类号
0702 ; 070205 ; 0703 ; 080501 ;
摘要
The interaction of solid particles with a solidifying interface is studied with numerical and analytical models for the drag and pushing forces. The numerical results of the drag force on a spherical particle and planar interface were compared with the forces given by both, the Stokes and modified Stokes equations. The pushing force was calculated employing the Casimir-Lifshitz-van der Waals force. The results show the range and degree of validity of the Stokes and modified Stokes equations for large and small separations. From this, it is shown that the particle-interface separations for steady pushing obtained numerically, for the same particle radius and solidification velocity. In addition, the critical velocities obtained with the present hybrid model are compared with experimental results published in the literature. (C) 2007 Elsevier B.V. All rights reserved.
引用
收藏
页码:1366 / 1370
页数:5
相关论文
共 50 条
  • [31] Calculation of drag and torque coefficients by time-independent lattice-Boltzmann method
    Ding, E. J.
    PHYSICAL REVIEW E, 2014, 90 (03):
  • [32] Computation of ion drag force on a static spherical dust grain immersed in rf discharges
    Ikkurthi, V. R.
    Matyash, K.
    Melzer, A.
    Schneider, R.
    PHYSICS OF PLASMAS, 2009, 16 (04)
  • [33] Magnetophoretic measurement of the drag force on partially immersed microparticles at air-liquid interfaces
    Ally, Javed
    Amirfazli, A.
    COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 2010, 360 (1-3) : 120 - 128
  • [34] Numerical study of gas-solid drag models in a bubbling fluidized bed
    Zinani, F.
    Philippsen, C. G.
    Indrusiak, M. L. S.
    PARTICULATE SCIENCE AND TECHNOLOGY, 2018, 36 (01) : 1 - 10
  • [35] Experimental and Numerical Investigation of Particle Kinematics in Shotcrete
    Ginouse, Nicolas
    Jolin, Marc
    JOURNAL OF MATERIALS IN CIVIL ENGINEERING, 2014, 26 (11)
  • [36] Numerical Simulations of a Fluid-Particle Coupling
    Aguillon, Nina
    FINITE VOLUMES FOR COMPLEX APPLICATIONS VII - ELLIPTIC, PARABOLIC AND HYPERBOLIC PROBLEMS, FVCA 7, 2014, 78 : 759 - 767
  • [37] Experimental analysis of a new attraction force applied on metal particles
    Alibida, Ahmed
    Zelmat, Samir
    Zelmat, Mohamed Elmouloud
    Neagoe, Marian Bogdan
    Miloua, Farid
    Dascalescu, Lucien
    Tilmatine, Amar
    PARTICULATE SCIENCE AND TECHNOLOGY, 2020, 38 (04) : 505 - 510
  • [38] On the attraction force applied on metal pieces in a traveling wave conveyor
    Tilmatine, Amar
    Alibida, Ahmed
    Zelmat, Samir
    Louati, Hamza
    Bellebna, Yassine
    Miloua, Farid
    JOURNAL OF ELECTROSTATICS, 2018, 96 : 64 - 68
  • [39] A MODEL FOR ABNORMAL GRAIN GROWTH IN NANO-CRYSTALLINE MATERIALS BASED ON ZENER DRAG FORCE
    Razavi-Tousi, S. S.
    Yazdani-Rad, R.
    Manafi, S. A.
    ARCHIVES OF METALLURGY AND MATERIALS, 2012, 57 (01) : 79 - 85
  • [40] CFD-DEM Evaluation of the Clustering Behavior in a Riser-the Effect of the Drag Force Model
    Ramirez, Juan
    de Munck, Martijn
    Liu, Zhitao
    Rieder, David Raphael
    Baltussen, Maike
    Buist, Kay
    Kuipers, Johannes A. M. Hans
    INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2023, 62 (45) : 18960 - 18972