Hyperband Conical Antenna Design Using 3D Printing Technique

被引：0
|
作者：
Andriambeloson, J. A. [1 ]
Wiid, P. G. [1 ]
机构：
[1] Univ Stellenbosch, Elect & Elect Engn Dept, Western Cape, South Africa
来源：
2015 IEEE RADIO AND ANTENNA DAYS OF THE INDIAN OCEAN (RADIO) | 2015年
关键词：
D O I：
暂无
中图分类号：
TM [电工技术]; TN [电子技术、通信技术];
学科分类号：
0808 ; 0809 ;
摘要：
A 3D printed antenna design technique is presented to be used for electromagnetic interference source finding on the MeerKAT site. The antennas are built with a polylactic acid plastic and are coated with conductive paint. Simulation and measurements are correlated for our conical based antennas. An extruded bi-conical configuration is promising for bandwidth extension to low frequency range.
引用
收藏
页数：2
相关论文
共 50 条
  • [1] Antenna Rotator Design by 3D Printing
    Simon, Ondrej
    Popela, Miroslav
    2022 24TH INTERNATIONAL MICROWAVE AND RADAR CONFERENCE (MIKON), 2022,
  • [2] Design of a Circular Patch Antenna for 3D Printing
    Ramly, Athirah Mohd
    Malek, Norun Abdul
    Mohamad, Sarah Yasmin
    Sukor, Masturah Ahamad
    PROCEEDINGS OF 6TH INTERNATIONAL CONFERENCE ON COMPUTER AND COMMUNICATION ENGINEERING (ICCCE 2016), 2016, : 406 - 410
  • [3] Design, fabrication, and testing of a helical antenna using 3D printing technology
    Ghassemiparvin, Behnam
    Ghalichechian, Nima
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2020, 62 (04) : 1577 - 1580
  • [4] Development of 15-dB Gain Conical Horn Antenna Using 3D Printing Technology
    Karakoc, Murat Can
    Sahin, Asaf Behzat
    ELECTRICA, 2020, 20 (02): : 177 - 181
  • [5] Broadband Antenna Design Using Different 3D Printing Technologies and Metallization Processes
    Hoel, Karina Vieira
    Kristoffersen, Stein
    Moen, Jonas
    Kjelgard, Kristian Gjertsen
    Lande, Tor Sverre
    2016 10TH EUROPEAN CONFERENCE ON ANTENNAS AND PROPAGATION (EUCAP), 2016,
  • [6] A Novel Strain Sensor Based on 3D Printing Technology and 3D Antenna Design
    Le, Taoran
    Song, Bo
    Liu, Qi
    Bahr, Ryan A.
    Moscato, Stefano
    Wong, Ching-Ping
    Tentzeris, Manos. M.
    2015 IEEE 65TH ELECTRONIC COMPONENTS AND TECHNOLOGY CONFERENCE (ECTC), 2015, : 981 - 986
  • [7] A Wideband CP Antenna by using 3D Printing polarizer
    Wang, Kai Xu
    Wong, Hang
    2016 IEEE INTERNATIONAL CONFERENCE ON COMPUTATIONAL ELECTROMAGNETICS (ICCEM), 2016, : 180 - 182
  • [8] Design and realization of multilayered cylindrical dielectric lens antenna using 3D printing technology
    Mahouti, Peyman
    Belen, Mehmet A.
    Gunes, Filiz
    Yurt, Reyhan
    MICROWAVE AND OPTICAL TECHNOLOGY LETTERS, 2019, 61 (05) : 1400 - 1403
  • [9] Design and fabrication of antennas using 3D printing
    Bjorgaard J.
    Hoyack M.
    Huber E.
    Mirzaee M.
    Chang Y.-H.
    Noghanian S.
    Progress In Electromagnetics Research C, 2018, 84 : 119 - 134
  • [10] New Technique for GI Endoscopy Using 3D Printing
    Cho, Joo Young
    Yoo, Jun Hwan
    Kim, Duk Hwan
    Wonhee, Kim
    Ko, Kwang Hyun
    Hahm, Ki Baik
    Hong, Sung-Pyo
    Park, Pil Won
    Cho, Jun-Hyung
    Ko, Weon-Jin
    GASTROINTESTINAL ENDOSCOPY, 2015, 81 (05) : AB451 - AB451
12345