Development of Anti-Ballistic Board from Ramie Fiber

被引：50

作者：

Ali, Aidy ^{[1
]}

Shaker, Z. R. ^{[1
]}

Khalina, A. ^{[2
]}

Sapuan, S. M. ^{[1
]}

机构：

[1] Univ Putra Malaysia, Dept Mech & Mfg Engn, Fac Engn, Serdang 43400, Selangor, Malaysia

[2] Univ Putra Malaysia, Dept Biol & Agr Engn, Fac Engn, Serdang, Malaysia

来源：

POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING | 2011年 / 50卷 / 06期

关键词：

Anti-ballistic; Kevlar; Ramie fiber; PROJECTILES; PENETRATION; PERFORATION; ABSORPTION;

D O I：

10.1080/03602559.2010.551381

中图分类号：

O63 [高分子化学（高聚物）];

学科分类号：

070305 ; 080501 ; 081704 ;

摘要：

A laminate of a composite was developed from Kevlar 29-ramie fiber reinforced by polyester resin for hard body armor. The focused given to the ballistic limit, maximum energy absorption, composite failure mode, lifetime rupture, target geometry and environmental effects. The results indicated that the maximum ballistic limit at impact speed is 623.97m/s for a 15-mm target thickness and 837m/s for a target thickness of 25mm. The targets were improved in terms of the impact response with increasing relative humidity in the range of 50%+/- 20% but were relatively decreased in terms of resistance with increasing temperature.

引用

页码：622 / 634

页数：13

共 26 条

[1] Influence of weathering and gamma irradiation on the mechanical and ballistic behavior of UHMWPE composite armor
Alves, ALS
Nascimento, LFC
Suarez, JCM
[J]. POLYMER TESTING, 2005, 24 (01) : 104 - 113
[2] [Anonymous], BALLISTIC IMPACT COM
[3] The effect of alkaline treatment on tensile properties of sugar palm fibre reinforced epoxy composites
Bachtiar, D.
Sapuan, S. M.
Hamdan, M. M.
[J]. MATERIALS & DESIGN, 2008, 29 (07) : 1285 - 1290
[4] The Influence of Alkaline Surface Fibre Treatment on the Impact Properties of Sugar Palm Fibre-Reinforced Epoxy Composites
Bachtiar, D.
Sapuan, S. M.
Hamdan, M. M.
[J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2009, 48 (04) : 379 - 383
[5] Perforation of 12 mm thick steel plates by 20 mm diameter projectiles with flat, hemispherical and, conical noses Part II: numerical simulations
Borvik, T
Hopperstad, OS
Berstad, T
Langseth, M
[J]. INTERNATIONAL JOURNAL OF IMPACT ENGINEERING, 2002, 27 (01) : 37 - 64
[6] THE EFFICIENCY OF CELLULOSIC FILLERS IN COMMON THERMOPLASTICS .2. FILLING WITH PROCESSING AIDS AND COUPLING AGENTS
DALVAG, H
KLASON, C
STROMVALL, HE
[J]. INTERNATIONAL JOURNAL OF POLYMERIC MATERIALS, 1985, 11 (01) : 9 - 38
[7] Mechanical and thermal characterization of epoxy composites reinforced with random and quasi-unidirectional untreated Phormium tenax leaf fibers
De Rosa, Igor Maria
Santulli, Carlo
Sarasini, Fabrizio
[J]. MATERIALS & DESIGN, 2010, 31 (05) : 2397 - 2405
[8] Dunn E. S., 1994, US Patent No, Patent No. 5349893
[9] Effect of Montmorillonite Clay Nanoparticles on the Properties of Polypropylene Fibres
Effenberger, F.
Schweizer, M.
Mohamed, W. S.
[J]. POLYMER-PLASTICS TECHNOLOGY AND ENGINEERING, 2010, 49 (06) : 525 - 530
[10] HSIEH CY, 1990, INT SAMPE TECHN C BO, P1

← 1 2 3 →