Revisit the role of deformation twins on the work-hardening behaviour of twinning-induced plasticity steels

被引：102
作者：
Luo, Z. C.
Huang, M. X. [1 ]
机构：
[1] Univ Hong Kong, Shenzhen Inst Res & Innovat, Shenzhen, Peoples R China
来源：
SCRIPTA MATERIALIA | 2018年 / 142卷
基金：
中国国家自然科学基金;
关键词：
TWIP steel; Strain rate sensitivity; Dislocation density; Dynamic strain aging; Synchrotron X-ray diffraction; STACKING-FAULT ENERGY; FLOW-STRESS; TEMPERATURES; DEPENDENCE; MECHANISMS; EVOLUTION; MODEL; GRAIN;
D O I：
10.1016/j.scriptamat.2017.08.017
中图分类号：
TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The present study found that the work-hardening rate and dislocation density in a twinning-induced plasticity (TWIP) steel deformed at 373 K and 473 K are comparable to that deformed at 298 K, but deformation twins are considerably prohibited at 373 and 473 K. High dislocation density induced by dynamic strain aging (DSA) is the dominant mechanism responsible for the high work -hardening rate of TWIP steels at 373 and 473 K. It indicates that TWIP steels can also achieve high working-hardening rate without the formation of deformation twins. (C) 2017 Acta Materialia Inc. Published by Elsevier Ltd. All rights reserved.
引用
收藏
页码：28 / 31
页数：4
相关论文
共 26 条
[1]   Effect of grain and twin boundaries on the hardening mechanisms of twinning-induced plasticity steels [J].
Bouaziz, O. ;
Allain, S. ;
Scott, C. .
SCRIPTA MATERIALIA, 2008, 58 (06) :484-487
[2]   High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships [J].
Bouaziz, O. ;
Allain, S. ;
Scott, C. P. ;
Cugy, P. ;
Barbier, D. .
CURRENT OPINION IN SOLID STATE & MATERIALS SCIENCE, 2011, 15 (04) :141-168
[3]   Modelling of TWIP effect on work-hardening [J].
Bouaziz, O ;
Guelton, N .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2001, 319 :246-249
[4]  
CERNATESCU I., 2002, THESIS
[5]   MECHANISM OF WORK-HARDENING IN HADFIELD MANGANESE STEEL [J].
DASTUR, YN ;
LESLIE, WC .
METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1981, 12 (05) :749-759
[6]   Influence of addition elements on the stacking-fault energy and mechanical properties of an austenitic Fe-Mn-C steel [J].
Dumay, A. ;
Chateau, J. -P. ;
Allain, S. ;
Migot, S. ;
Bouaziz, O. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2008, 483-84 :184-187
[7]   Temperature dependence of the flow stress of Fe-18Mn-0.6C-xA1 twinning-induced plasticity steel [J].
Jung, Il-Chan ;
De Cooman, Bruno C. .
ACTA MATERIALIA, 2013, 61 (18) :6724-6735
[8]   The effects of grain size on yielding, strain hardening, and mechanical twinning in Fe-18Mn-0.6C-1.5Al twinning-induced plasticity steel [J].
Kang, Singon ;
Jung, Jae-Gil ;
Kang, Mihyun ;
Woo, Wanchuck ;
Lee, Young-Kook .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 652 :212-220
[9]   Stacking fault energy and deformation mechanisms in Fe-xMn-0.6C-yAl TWIP steel [J].
Kim, Jin-Kyung ;
De Cooman, Bruno C. .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2016, 676 :216-231
[10]   Application of a Dislocation Density-Based Constitutive Model to Al-Alloyed TWIP Steel [J].
Kim, Jinkyung ;
Estrin, Yuri ;
De Cooman, Bruno Charles .
METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2013, 44A (09) :4168-4182
123