Improvement of delayed hydride cracking assessment of PWR spent fuel during dry storage

被引：3
|
作者：
Hong, Jong-Dae [1 ]
Yang, Yong-Sik [1 ]
Kook, Donghak [1 ]
机构：
[1] Korea Atom Energy Res Inst, ATF Technol Dev Div, 989-111 Daedeok Daero, Daejeon 34057, South Korea
来源：
NUCLEAR ENGINEERING AND TECHNOLOGY | 2020年 / 52卷 / 03期
关键词：
DHC; PWR spent fuel; dry storage; Sensitivity; BEHAVIOR;
D O I：
10.1016/j.net.2019.07.036
中图分类号：
TL [原子能技术]; O571 [原子核物理学];
学科分类号：
0827 ; 082701 ;
摘要：
In a previous study, delayed hydride cracking (DHC) assessment of pressurized water reactor (PWR) spent fuel during dry storage using the threshold stress intensity factor (K-IH) was performed. However, there were a few limitations in the analysis of the cladding properties, such as oxide thickness and mechanical properties. In this study, those models were modified to include test data for irradiated materials, and the cladding creep model was introduced to improve the reliability of the DHC assessment. In this study, DHC susceptibility of PWR spent fuel during dry storage depending on the axial elevation was evaluated with the improved assessment methodology. In addition, the sensitivity of affecting parameters such as fuel burnup, hydride thickness, and crack aspect ratio are presented. (C) 2019 Korean Nuclear Society, Published by Elsevier Korea LLC.
引用
收藏
页码：614 / 620
页数：7
相关论文
共 50 条
  • [1] Delayed hydride cracking assessment of PWR spent fuel during dry storage
    Hong, Jong-Dae
    Kim, Hyo-Chan
    Kim, Ju-Seong
    Yang, Yong-Sik
    Kook, Dong-Hak
    NUCLEAR ENGINEERING AND DESIGN, 2017, 322 : 324 - 330
  • [2] Hydride Reorientation and Delayed Hydride Cracking of Spent Fuel Rods in Dry Storage
    Kim, Young S.
    METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2009, 40A (12): : 2867 - 2875
  • [3] Is Spent Nuclear Fuel Immune from Delayed Hydride Cracking during Dry Storage? An IAEA Coordinated Research Project
    Coleman, Christopher E.
    Markelov, Vladimir A.
    Roth, Maria
    Makarevicius, Vidas
    He, Zhang
    Chakravartty, Jayanta Kumar
    Alvarez-Holston, Anna-Maria
    Ali, Liaqat
    Ramanathan, Lalgudi
    Inozemtsev, Victor
    ZIRCONIUM IN THE NUCLEAR INDUSTRY: 18TH INTERNATIONAL SYMPOSIUM, 2018, 1597 : 1224 - 1251
  • [4] Design study of a modular dry storage facility for typical PWR spent fuel
    Igbal, Masood
    Khan, J.
    Mirza, Sikander M.
    PROGRESS IN NUCLEAR ENERGY, 2006, 48 (06) : 487 - 494
  • [5] Cost comparisons of wet and dry interim storage facilities for PWR spent nuclear fuel in Korea
    Cho, Chun-Hyung
    Kim, Tae-Man
    Seong, Ki-Yeoul
    Kim, Hyung-Jin
    Yoon, Jeong-Hyoun
    ANNALS OF NUCLEAR ENERGY, 2011, 38 (05) : 976 - 981
  • [6] Spent fuel rod splitting due to UO2 oxidation during dry storage: Assessment of the database
    Herranz, L. E.
    Feria, F.
    PROGRESS IN NUCLEAR ENERGY, 2009, 51 (02) : 201 - 206
  • [7] Conceptual Design, Development, and Preliminary Safety Evaluation of a PWR Dry Storage Module for Spent Nuclear Fuel
    Kim, Taehyeon
    Kim, Kiyoung
    Lee, Donghee
    Na, Taehyung
    Chung, Sunghwan
    Kim, Yongdeog
    APPLIED SCIENCES-BASEL, 2022, 12 (09):
  • [8] Modeling of hydrogen behavior in spent fuel claddings during dry storage
    Kolesnik, M.
    Aliev, T.
    Likhanskii, V.
    JOURNAL OF NUCLEAR MATERIALS, 2018, 508 : 567 - 573
  • [9] Fuel cycle cost analysis of PWR with MOX fuel and dry storage
    China Nuclear Power Technology Research Institute, Shenzhen
    518026, China
    Yuanzineng Kexue Jishu, (430-433): : 430 - 433
  • [10] Spent fuel simulation during dry storage via enhancement of FRAPCON-4.0: Comparison between PWR and SMR and discharge burnup effect
    Lee, Youho
    Woo, Dahyeon
    NUCLEAR ENGINEERING AND TECHNOLOGY, 2022, 54 (12) : 4499 - 4513
12345