The effect of polyester recycled tire fibers mixed with ground tire rubber on polyethylene composites. Part II: Physico-mechanical analysis

被引：18
作者：
Moghaddamzadeh, Siavosh [1 ]
Rodrigue, Denis [1 ]
机构：
[1] Univ Laval, Dept Chem Engn, 1065 Ave Med, Quebec City, PQ G1V 0A6, Canada
来源：
PROGRESS IN RUBBER PLASTICS AND RECYCLING TECHNOLOGY | 2018年 / 34卷 / 03期
基金：
加拿大自然科学与工程研究理事会;
关键词：
Polyester; recycled tire fibers; ground tire rubber; polyethylene; mechanical properties; MECHANICAL-PROPERTIES; MALEIC-ANHYDRIDE; G-MA; BLENDS; COMPATIBILIZATION; POLYPROPYLENE;
D O I：
10.1177/1477760618798268
中图分类号：
TB33 [复合材料];
学科分类号：
摘要：
This work reports on the mechanical (tension, flexion, and impact) and physical (density and hardness) properties of polyester recycled tire fibers (RTFs) mixed with ground tire rubber and linear low-density polyethylene with and without styrene-ethylene-butylene-styrene grafted maleic anhydride as a compatibilizer. In particular, the effect of RTF content (10, 25, and 50 wt%), extruder screw speed (110, 180, and 250 r/min), and temperature profiles (extrusion and injection molding) was studied. The results showed that the best properties were obtained at the highest RTF content (50%) and extruder screw speed (250 r/min) combined with the lowest temperature profile in both extrusion and injection molding when the compatibilizer was added.
引用
收藏
页码：128 / 142
页数：15
相关论文
共 22 条
123