Experimental and Numerical Simulations of 3D-Printed Polycaprolactone Scaffolds for Bone Tissue Engineering Applications

被引:10
|
作者
Xu, Zhanyan [1 ]
Omar, Abdalla M. [1 ]
Bartolo, Paulo [1 ]
机构
[1] Univ Manchester, Sch Mech Aerosp & Civil Engn, Manchester M13 9PL, England
基金
英国工程与自然科学研究理事会;
关键词
additive manufacturing; bone scaffolds; finite element analysis; mechanical analysis;
D O I
10.3390/ma14133546
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Ideal bone scaffolds for tissue engineering should be highly porous allowing cell attachment, spreading, and differentiation and presenting appropriate biomechanical properties. These antagonistic characteristics usually require extensive experimental work to achieve optimised balanced properties. This paper presents a simulation approach to determine the mechanical behaviour of bone scaffolds allowing the compressive modulus and the deformation mechanisms to be predicted. Polycaprolactone scaffolds with regular square pores and different porosities were considered. Scaffolds were also printed using an extrusion-based additive manufacturing and assessed under compressive loads. Similar designs were used for both simulation and fabrication steps. A good correlation between numerical and experimental results was obtained, highlighting the suitability of the simulation tool for the mechanical design of 3D-printed bone scaffolds.
引用
收藏
页数:11
相关论文
共 50 条
  • [1] Review of Physical, Mechanical, and Biological Characteristics of 3D-Printed Bioceramic Scaffolds for Bone Tissue Engineering Applications
    Thangavel, Mahendran
    Selvam, Renold Elsen
    ACS BIOMATERIALS SCIENCE & ENGINEERING, 2022, 8 (12) : 5060 - 5093
  • [2] 3D-Printed Graphene and Graphene Quantum Dot-Reinforced Polycaprolactone Scaffolds for Bone-Tissue Engineering
    Meng, Duo
    Hou, Yanhao
    Kurniawan, Darwin
    Weng, Ren-Jie
    Chiang, Wei-Hung
    Wang, Weiguang
    ACS APPLIED NANO MATERIALS, 2024, 7 (01) : 1245 - 1256
  • [3] Hydrogel-integrated 3D-printed poly(lactic acid) scaffolds for bone tissue engineering
    Mitun Das
    Orna Sharabani-Yosef
    Noam Eliaz
    Daniel Mandler
    Journal of Materials Research, 2021, 36 : 3833 - 3842
  • [4] Recent advances on 3D-printed PCL-based composite scaffolds for bone tissue engineering
    Gharibshahian, Maliheh
    Salehi, Majid
    Beheshtizadeh, Nima
    Kamalabadi-Farahani, Mohammad
    Atashi, Amir
    Nourbakhsh, Mohammad-Sadegh
    Alizadeh, Morteza
    FRONTIERS IN BIOENGINEERING AND BIOTECHNOLOGY, 2023, 11
  • [5] 3D-printed barium strontium titanate-based piezoelectric scaffolds for bone tissue engineering
    Tariverdian, Tara
    Behnamghader, Aliasghar
    Milan, Peiman Brouki
    Barzegar-Bafrooei, Hadi
    Mozafari, Masoud
    CERAMICS INTERNATIONAL, 2019, 45 (11) : 14029 - 14038
  • [6] Mechanical Behavior of 3D-Printed Schwarz Diamond-Structured Scaffolds for Tissue Engineering Applications
    Agarwal, R.
    Malhotra, S.
    Gupta, V.
    Jain, V.
    STRENGTH OF MATERIALS, 2024, 56 (04) : 774 - 784
  • [7] Hydrogel-integrated 3D-printed poly(lactic acid) scaffolds for bone tissue engineering
    Das, Mitun
    Sharabani-Yosef, Orna
    Eliaz, Noam
    Mandler, Daniel
    JOURNAL OF MATERIALS RESEARCH, 2021, 36 (19) : 3833 - 3842
  • [8] Design, fabrication, and characterization of 3D-printed ABS and PLA scaffolds potentially for tissue engineering
    Rahatuzzaman, Md
    Mahmud, Minar
    Rahman, Sazedur
    Hoque, Md Enamul
    RESULTS IN ENGINEERING, 2024, 21 (21)
  • [9] Challenges on optimization of 3D-printed bone scaffolds
    Marjan Bahraminasab
    BioMedical Engineering OnLine, 19
  • [10] Challenges on optimization of 3D-printed bone scaffolds
    Bahraminasab, Marjan
    BIOMEDICAL ENGINEERING ONLINE, 2020, 19 (01)