A fully-3D-printed complementary right/left-handed transmission line

被引：0

作者：

Hester, Jimmy ^{[1
]}

Nguyen, Evan ^{[1
]}

Shishido, Reid ^{[1
]}

Tice, Jesse ^{[1
]}

Radisic, Vesna ^{[1
]}

机构：

[1] Northrop Grumman Corp, NG Next, One Space Pk, Redondo Beach, CA 90278 USA

来源：

2018 IEEE ANTENNAS AND PROPAGATION SOCIETY INTERNATIONAL SYMPOSIUM ON ANTENNAS AND PROPAGATION & USNC/URSI NATIONAL RADIO SCIENCE MEETING | 2018年

关键词：

3D-printing; additive manufacturing; metamaterial;

D O I：

暂无

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

In this effort, a full-3D design of a complementary right/left-handed (CRLH) transmission line structure with a transition frequency of 7.5GHz, which takes advantage of the unique capabilities of additive manufacturing technologies (AMT) is presented. A fully-additive fabrication process, combining SLA dielectric and aerosol conductor printing, is utilized. The fabricated CRLH structure is shown and measured. The approaches reported in this effort may set the foundation for the emergence of novel exotic metamaterial structures, enabled by the unique manufacturing capabilities of AMTs.

引用

页码：1885 / 1886

页数：2

共 7 条

[1] 3D Printed Plastic 60 GHz Lens: Enabling Innovative Millimeter Wave Antenna Solution and System [J].

Bisognin, Aimeric ;

Titz, Diane ;

Ferrero, Fabien ;

Pilard, Romain ;

Fernandes, Carlos A. ;

Costa, Jorge R. ;

Corre, Christian ;

Calascibetta, Pierino ;

Riviere, Jean-Michel ;

Poulain, Alexis ;

Badard, Christian ;

Gianesello, Frederic ;

Luxey, Cyril ;

Busson, Pierre ;

Gloria, Daniel ;

Belot, Didier .

2014 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM (IMS), 2014,

[2] Development of a Ku-Band Corrugated Conical Horn Using 3-D Print Technology [J].

Chieh, Jia-Chi Samuel ;

Dick, Brian ;

Loui, Stuart ;

Rockway, John D. .

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, 2014, 13 :201-204

[3]

Hester J, 2017, IEEE ANTENNAS PROP, P2639, DOI 10.1109/APUSNCURSINRSM.2017.8073362

[4] 3-D Printed Microwave Patch Antenna via Fused Deposition Method and Ultrasonic Wire Mesh Embedding Technique [J].

Liang, Min ;

Shemelya, Corey ;

MacDonald, Eric ;

Wicker, Ryan ;

Xin, Hao .

IEEE ANTENNAS AND WIRELESS PROPAGATION LETTERS, 2015, 14 :1346-1349

[5]

Liu L., 2002, ELECTRON LETT, V38, P1

[6]

Nate KA, 2015, EUR MICROW CONF, P610, DOI 10.1109/EuMC.2015.7345837

[7] Aerosol based direct-write micro-additive fabrication method for sub-mm 3D metal-dielectric structures [J].

Rahman, Taibur ;

Renaud, Luke ;

Heo, Deuk ;

Renn, Michael ;

Panat, Rahul .

JOURNAL OF MICROMECHANICS AND MICROENGINEERING, 2015, 25 (10)

← 1 →