EFFECT OF COLEMANITE ADDITIONS ON SINTERING, PROPERTIES, AND MICROSTRUCTURE OF SPODUMENE HEATPROOF CERAMIC

被引：4

作者：

Kichkailo, O. V. ^{[1
]}

Levitskii, I. A. ^{[1
]}

机构：

[1] Belarus State Technol Univ, Inst Educ, Minsk, BELARUS

来源：

GLASS AND CERAMICS | 2011年 / 68卷 / 1-2期

关键词：

colemanite; spodumene ceramic; sintering; heat-tolerance;

D O I：

10.1007/s10717-011-9321-0

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

The effect of colemanite additives on sintering and the properties and microstructure of spodumene ceramic is studied. It is found that to identify the sintering and formation processes of a higher-density structure of ceramic it is most effective to introduce colemanite in the amounts 5 - 7%. Spodumene ceramic with CLTE (9.8 - 12.9) x 10(-7) K-1, heat-tolerance greater than 100 heat cycles (800 degrees C - water), water absorption 0.7 - 5.0%, and mechanical strength under bending 33 - 44 MPa, which all obtain at the sintering temperature 1200 degrees C, was obtained.

引用

页码：56 / 60

页数：5

共 50 条

[41] Effect of Y-PSZ additive on the structure, thermal behaviour and mechanical properties of β-spodumene ceramic
Univ of Mining and Metallurgy, Krakow, Poland
Key Eng Mat, Pt 2 (952-955):
[42] EFFECT OF NICKEL ADDITIONS ON SINTERING MOLYBDENUM
LEJBRANDT, MM
RUTKOWSKI, W
INTERNATIONAL JOURNAL OF POWDER METALLURGY, 1978, 14 (01): : 17 - &
[43] Effect of polyvinyl butyral on the glass/ceramic tape and sintering properties
College of Materials Science and Engineering, Nanjing University of Technology, Nanjing 210009, China
Zhou, H.-Q. (hqzhou@njut.edu.cn), 1600, Journal of Functional Materials (45):
[44] Effect of sintering temperature on properties of silica based ceramic core
Long, Yong-Cheng
Liu, Zhi-Yi
Guo, Min
Li, Zhi-Xian
Lei, Si-Xiong
Han, Xiang-Nan
Wang, Rong-Feng
Fenmo Yejin Cailiao Kexue yu Gongcheng/Materials Science and Engineering of Powder Metallurgy, 2011, 16 (04): : 591 - 596
[45] Effect of green density on the thermomechanical properties of a ceramic during sintering
Schoenberg, Sam E.
Green, David J.
Messing, Gary L.
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2006, 89 (08) : 2448 - 2452
[46] EFFECT OF MINOR ADDITIONS ON SINTERING OF MGO
LAYDEN, GK
MCQUARRIE, MC
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1959, 42 (02) : 89 - 92
[47] Properties of selective laser melted spodumene glass-ceramic
Gan, M. X.
Wong, C. H.
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY, 2017, 37 (13) : 4147 - 4154
[48] Preparation and properties of spodumene/silicon carbide composite ceramic materials
Lu Yuan-Yuan
Lu Gui-Hua
Zhou Heng-Wei
Huang Yi-Neng
ACTA PHYSICA SINICA, 2020, 69 (11)
[49] EFFECT OF OXIDE ADDITIONS ON SINTERING OF MAGNESIA
NELSON, JW
CUTLER, IB
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1958, 41 (10) : 406 - 409
[50] Effect of Sintering Temperature on the Mechanical Properties and Microstructure of Alumina-Zirconia Fabricated via Ceramic Injection Moulding Method
Ani, Sarizal Md
Muchtar, Andanastuti
Muhamad, Norhamidi
Ghani, Jaharah A.
SAINS MALAYSIANA, 2017, 46 (10): : 1979 - 1986

← 1 2 3 4 5 →