Studies on the development of cassava based reconstituted dry starch sago with modified starch as binder and characterization of its physico-functional properties

Aim : The objective of the study was to develop and characterize the properties of sago (sabudana) from cassava based reconstituted dry starch with addition of pre-gelatinized starch and wet starch as binders. Methodology : The dry starch was soaked for 12 hrs at 30 % concentration and then sago was prepared at 40% moisture content with addition of pre-gelatinized starch and wet starch as binders in different treatment combinations. Results : The sago developed from the combination of reconstituted dry starch (75%) and wet starch (25%) had an optimal commercial size (3.36 mm) and shape (sphericity value, 76 %). The swelling power (5.98%) was high in reconstituted dry starch sago and solubility (13.42 %) was high in wet starch sago without the addition of any binders. The increase in cooking time (10.37%) and decrease in cooking loss (1.73%) were observed for sago developed with pre-gelatinized starch as binder. The lowest oil absorption index (0.45 g g(-1)) was noticed for sago prepared with wet starch as a binder. The storage modulus was comparatively lower for sago paste prepared using wet starch and thus the sago gel behaved like a dilute solution with increase in storage modulus and phase angle. Interpretation : The physico-functional properties of the cassava-based reconstituted dry starch sago can be improved by adding wet starch as a binder due to less retrogradation rate. Further, the addition of pre-gelatinized starch as a binder with reconstituted cassava dry starch can reduce the cooking loss in sago.