On the elastic deformation properties of porous ceramic materials obtained by pore-forming agent method

被引：46
|
作者：
Pia, Giorgio [1 ]
Casnedi, Ludovica [1 ]
Ionta, Matteo [1 ]
Sanna, Ulrico [1 ]
机构：
[1] Univ Cagliari, Dipartimento Ingn Meccan Chim & Mat, I-09123 Cagliari, Italy
来源：
CERAMICS INTERNATIONAL | 2015年 / 41卷 / 09期
关键词：
Elastic modulus; Fractal modelling; Material design; Pore size distribution; Porous ceramics; FRACTAL UNITS MODEL; EFFECTIVE THERMAL-CONDUCTIVITY; MULLITE-CORUNDUM CERAMICS; MECHANICAL-PROPERTIES; SIZE DISTRIBUTION; HIGH-POROSITY; GENERALIZED-MODEL; ALUMINA CERAMICS; HIGH-STRENGTH; FABRICATION;
D O I：
10.1016/j.ceramint.2015.05.057
中图分类号：
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号：
0805 ; 080502 ;
摘要：
The influence of the pore size distribution on the elastic modulus has been studied using an intermingled fractal model (IFU) capable to reproduce entirely pore size distribution of materials. The results obtained from IFU modelling are in good agreement with experimental ones. The model could be considered as a microstructure simulator to improve mechanical properties of porous ceramic materials. (C) 2015 Elsevier Ltd and Techna Group S.r.l. All rights reserved.
引用
收藏
页码：11097 / 11105
页数：9
相关论文
共 50 条
  • [41] Preparation of Porous Mullite Ceramics Using Fly Ash Cenosphere as a Pore-Forming Agent by Gelcasting Process
    Qian, Haoran
    Cheng, Xudong
    Zhang, Heping
    Zhang, Ruifang
    Wang, Yonghong
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2014, 11 (05) : 858 - 863
  • [42] Preparation of Porous Al2O3 Ceramics by Gelcasting with PMMA as Pore-forming Agent
    Hao B.
    Cheng S.
    Zhang J.
    Wang C.
    Kuei Suan Jen Hsueh Pao/Journal of the Chinese Ceramic Society, 2019, 47 (09): : 1242 - 1246
  • [43] Sago starch as binder and pore-forming agent for the fabrication of porcelain foam
    Jamaludin, Abdul Rashid
    Kasim, Shah Rizal
    Abdullah, Mohd Zukifly
    Ahmad, Zainal Arifin
    CERAMICS INTERNATIONAL, 2014, 40 (03) : 4777 - 4784
  • [44] DLP 3D-printing of dual porous YSZ ceramics with high mechanical properties using PMMA microsphere as pore-forming agent
    Liu, Yansong
    Liu, Yongsheng
    Cao, Yejie
    Zheng, Xiang
    Sun, Xiaokun
    Xu, Yang
    JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 2025,
  • [45] Highly porous LAS-SiC ceramic with near-zero thermal expansion prepared via aqueous gel-casting combined with adding pore-forming agents
    Zhong, Zhaoxin
    Zhang, Biao
    Tian, Ziyi
    Ye, Jian
    Zhang, Haoqian
    Gao, Ye
    Liu, Qiang
    Zhang, Zhiguo
    Ye, Feng
    MATERIALS CHARACTERIZATION, 2022, 187
  • [46] Rice Husk as a Pore-Forming Agent: Impact of Particle Size on the Porosity and Diametral Tensile Strength of Porous Alumina Ceramics
    Dele-Afolabi, T. T.
    Hanim, M. A. Azmah
    Jung, D. W.
    Ilyas, R. A.
    Calin, R.
    Izzah, A. R. Nurul
    COATINGS, 2022, 12 (09)
  • [47] Preparation of high-strength lightweight alumina with plant-derived pore using corn stalk as pore-forming agent
    Li, Xuesong
    Li, Yuanbing
    Li, Shujing
    Wei, Zhipeng
    Xiang, Ruofei
    INTERNATIONAL JOURNAL OF APPLIED CERAMIC TECHNOLOGY, 2020, 17 (05) : 2465 - 2472
  • [48] Effects of sintering temperature on pore characterization and strength of porous cordierite-mullite ceramics by a pore-forming in-situ technique
    Yan, Wen
    Luo, Hao
    Tong, Jun
    Li, Nan
    INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, 2012, 103 (10) : 1239 - 1243
  • [49] Ceramic tiles with controlled porosity and low thermal conductivity by using pore-forming agents
    Novais, Rui M.
    Seabra, M. P.
    Labrincha, J. A.
    CERAMICS INTERNATIONAL, 2014, 40 (08) : 11637 - 11648
  • [50] Mechanical Properties and Flow Characteristics o f Dolomite-based Porous Supports for Catalysts Using Different Pore-Forming Agents
    Li, Yongjun
    Wei, Heng
    Liu, Shanjian
    He, Zhisen
    Zhao, Wenjing
    BIORESOURCES, 2022, 17 (04) : 6679 - 6691
12345