Tool wear in soft part turning of high performance steel

被引：3

作者：

Anmark, Niclas ^{[1
]}

Bjork, Thomas ^{[2
]}

机构：

[1] Scania CV AB, S-15187 Sodertalje, Sweden

[2] Swerea KIMAB, Isafjordsgatan 28A, S-16440 Kista, Sweden

来源：

7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING | 2016年 / 46卷

关键词：

Machinability; Turning; Wear;

D O I：

10.1016/j.procir.2016.04.043

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work reports on the machinability differentiation in semi finishing of three carburizing steel grades that are used in transmission components such as gears, crown wheels and pinions. A reference steel grade of type 20NiCrMo was compared with a clean steel (S=40 ppm) and an ultra-clean steel (S=10 ppm). Attention is on the link between the characteristics of the non-metallic inclusions of the steel grades and the balance of the flank and rake face wear of the CVD Al2O3 and TiCN coatings. The interaction of abrasive wear and thermo-mechanical degradation of the Al2O3 upper layer will be described. (C) 2016 The Authors. Published by Elsevier B.V

引用

页码：484 / 487

页数：4

共 50 条

[41] Neural-networks-based tool wear monitoring in turning medium carbon steel using a coated carbide tool
Das, S
Bandyopadhyay, PP
Chattopadhyay, AB
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 1997, 63 (1-3) : 187 - 192
[42] Influence of a high-pressure lubricoolant supply on thermo-mechanical tool load and tool wear behaviour in the turning of aerospace materials
Klocke, F.
Sangermann, H.
Kraemer, A.
Lung, D.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2011, 225 (B1) : 52 - 61
[43] The cutting tool stresses in finish turning of hardened steel with mixed ceramic tool
Kurt, Abdullah
Yalcin, Bekir
Yilmaz, Nihat
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 80 (1-4) : 315 - 325
[44] EFFECT OF THE CUTTING PARAMETERS IMPACT ON TOOL LIFE IN DUPLEX STAINLESS STEEL TURNING PROCESS
Krolczyk, Grzegorz
Gajek, Maksymilian
Legutko, Stanislaw
TEHNICKI VJESNIK-TECHNICAL GAZETTE, 2013, 20 (04): : 587 - 592
[45] Magnetorheological fluid-based nanotexturing of tool inserts for turning of duplex stainless steel
Thiyagu, M.
Karunamoorthy, L.
Kumar, N. Arun
MATERIALS AND MANUFACTURING PROCESSES, 2017, 32 (09) : 1019 - 1025
[46] Effect of Si Content on Wear Performance of Hot Work Tool Steel
B. Podgornik
B. Žužek
F. Kafexhiu
V. Leskovšek
Tribology Letters, 2016, 63
[47] Effect of Si Content on Wear Performance of Hot Work Tool Steel
Podgornik, B.
Zuzek, B.
Kafexhiu, F.
Leskovsek, V.
TRIBOLOGY LETTERS, 2016, 63 (01)
[48] Wear development and cutting forces on CBN cutting tool in Hard Part turning of different hardened steels
Sadik, M. Ibrahim
FIFTH CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING 2012, 2012, 1 : 232 - 237
[49] Performance Analysis of Hybrid Ceramic Insert in Dry Turning of Hardened Tool Steel
Debabrata Rath
Sumanta Panda
Kamal Pal
Arabian Journal for Science and Engineering, 2022, 47 : 15455 - 15476
[50] Machining performance of protruded textured high-speed steel cutting tool under dry turning operation
Prasad, K. Nagendra
Ismail, Syed
MATERIALS TODAY-PROCEEDINGS, 2022, 66 : 2115 - 2123

← 1 2 3 4 5 →