Tool wear in soft part turning of high performance steel

被引：3

作者：

Anmark, Niclas ^{[1
]}

Bjork, Thomas ^{[2
]}

机构：

[1] Scania CV AB, S-15187 Sodertalje, Sweden

[2] Swerea KIMAB, Isafjordsgatan 28A, S-16440 Kista, Sweden

来源：

7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING | 2016年 / 46卷

关键词：

Machinability; Turning; Wear;

D O I：

10.1016/j.procir.2016.04.043

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work reports on the machinability differentiation in semi finishing of three carburizing steel grades that are used in transmission components such as gears, crown wheels and pinions. A reference steel grade of type 20NiCrMo was compared with a clean steel (S=40 ppm) and an ultra-clean steel (S=10 ppm). Attention is on the link between the characteristics of the non-metallic inclusions of the steel grades and the balance of the flank and rake face wear of the CVD Al2O3 and TiCN coatings. The interaction of abrasive wear and thermo-mechanical degradation of the Al2O3 upper layer will be described. (C) 2016 The Authors. Published by Elsevier B.V

引用

页码：484 / 487

页数：4

共 50 条

[21] Influence of cutting edge geometry on tool wear performance in interrupted hard turning
Ventura, C. E. H.
Koehler, J.
Denkena, B.
JOURNAL OF MANUFACTURING PROCESSES, 2015, 19 : 129 - 134
[22] Effect of Si in Workpiece Material on Tool Wear in Hard Turning
Iwasaki, Tatsuya
Also, Toshiharu
Watari, Koji
TETSU TO HAGANE-JOURNAL OF THE IRON AND STEEL INSTITUTE OF JAPAN, 2018, 104 (04): : 208 - 217
[23] Study on cutting performance of cermet tool in turning of hardened alloy steel
Sarjana, S. S.
Bencheikh, I
Nouari, M.
Ginting, A.
INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2020, 91
[24] Coated tool Performance in Dry Turning of Super Duplex Stainless Steel
Rajaguru, J.
Arunachalam, N.
45TH SME NORTH AMERICAN MANUFACTURING RESEARCH CONFERENCE (NAMRC 45), 2017, 10 : 601 - 611
[25] Investigation on the Performance of Coated Carbide Tool during Dry Turning of AISI 4340 Alloy Steel
Wagri, Naresh Kumar
Jain, Neelesh Kumar
Petare, Anand
Das, Sudhansu Ranjan
Tharwan, Mohammed Y. Y.
Alansari, Abdulkarim
Alqahtani, Bader
Fattouh, Majed
Elsheikh, Ammar
MATERIALS, 2023, 16 (02)
[26] Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel
Xavior, M. Anthony
Adithan, M.
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2009, 209 (02) : 900 - 909
[27] Performance evaluation of Titanium nitride coated tool in turning of mild steel
Srinivas, B.
Kumar, G. Pramod
Cheepu, Muralimohan
Jagadeesh, N.
Kumar, K. Ravi
Haribabu, S.
INTERNATIONAL CONFERENCE ON RECENT ADVANCES IN MATERIALS, MECHANICAL AND CIVIL ENGINEERING, 2018, 330
[28] Influence of Turning Parameters on Turning Performance of Ultra-High Strength Steel
Zhang, Chang-Ming
Mu, An-Le
Wang, Yong-Xin
Wang, Yun
Zhang, Yu
INTEGRATED FERROELECTRICS, 2020, 209 (01) : 110 - 118
[29] Tool wear prediction in high-speed turning of a steel alloy using long short-term memory modelling
Marani, Mohsen
Zeinali, Mohammadjavad
Songmene, Victor
Mechefske, Chris K.
MEASUREMENT, 2021, 177
[30] Tool wear study in diamond turning of steels
Dai, T. F.
Fang, F. Z.
Hu, X. T.
JOURNAL OF VACUUM SCIENCE & TECHNOLOGY B, 2009, 27 (03): : 1335 - 1339

← 1 2 3 4 5 →