Tool wear in soft part turning of high performance steel

被引：3

作者：

Anmark, Niclas ^{[1
]}

Bjork, Thomas ^{[2
]}

机构：

[1] Scania CV AB, S-15187 Sodertalje, Sweden

[2] Swerea KIMAB, Isafjordsgatan 28A, S-16440 Kista, Sweden

来源：

7TH HPC 2016 - CIRP CONFERENCE ON HIGH PERFORMANCE CUTTING | 2016年 / 46卷

关键词：

Machinability; Turning; Wear;

D O I：

10.1016/j.procir.2016.04.043

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

This work reports on the machinability differentiation in semi finishing of three carburizing steel grades that are used in transmission components such as gears, crown wheels and pinions. A reference steel grade of type 20NiCrMo was compared with a clean steel (S=40 ppm) and an ultra-clean steel (S=10 ppm). Attention is on the link between the characteristics of the non-metallic inclusions of the steel grades and the balance of the flank and rake face wear of the CVD Al2O3 and TiCN coatings. The interaction of abrasive wear and thermo-mechanical degradation of the Al2O3 upper layer will be described. (C) 2016 The Authors. Published by Elsevier B.V

引用

页码：484 / 487

页数：4

共 50 条

[1] Tool wear in turning stainless-steel blanks
Gusev V.G.
Chemezov D.A.
Russian Engineering Research, 2015, 35 (04) : 295 - 297
[2] Tool wear of alumina ceramic tools in high speed turning of steel
Sekiya, K
Kitagawa, R
PROGRESS OF CUTTING AND GRINDING: WITH SOME TOPICS IN ADVANCED MANUFACTURE TECHNOLOGY, 1998, : 169 - 174
[3] An investigation of tool wear in high-speed turning of AISI 4340 steel
W. Bouzid Saï
The International Journal of Advanced Manufacturing Technology, 2005, 26 : 330 - 334
[4] An investigation of tool wear in high-speed turning of AISI 4340 steel
Saï, WB
INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2005, 26 (04) : 330 - 334
[5] Wear of coated and uncoated carbides in turning tool steel
Haron, CC
Ginting, A
Goh, JH
JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2001, 116 (01) : 49 - 54
[6] Tool wear estimation in turning operations
Ghasempoor, A
Moore, TN
Jeswiet, J
CONDITION MONITORING '99, PROCEEDINGS, 1999, : 255 - 268
[7] The performance of TiN-coated high speed steel tool inserts in turning
Lim, CYH
Lim, SC
Lee, KS
TRIBOLOGY INTERNATIONAL, 1999, 32 (07) : 393 - 398
[8] Initial tool wear behavior in high-speed turning of Inconel 718
Memarianpour, Morvarid
Niknam, Seyed Ali
Turenne, Sylvain
Balazinski, Marek
TRANSACTIONS OF THE CANADIAN SOCIETY FOR MECHANICAL ENGINEERING, 2020, 44 (03) : 395 - 404
[9] Tool wear deceleration in turning of Inconel 625
Lotfi M.
Farid A.A.
Jahanbakhsh M.
International Journal of Machining and Machinability of Materials, 2019, 21 (04): : 321 - 335
[10] Study with stainless steel AISI 630 of tool wear in external turning operations
Ortiz, J. A.
Rio, C.
Saluena, X.
Casals, J.
Capilla, A. I.
ADVANCES IN MATERIALS PROCESSING TECHNOLOGIE, 2006, 526 : 205 - 210

← 1 2 3 4 5 →