Etching silicon by SF6 in a continuous and pulsed power helicon reactor

The etch rate of silicon by SF6 in a helicon reactor has been measured along with simultaneous actinometric measurements of the concentration of atomic fluorine in the gas phase for a variety of gas flow rates resulting in pressures in the mTorr range. A bias rf power was applied to the substrate to investigate the effect of ion energy on the etch rate. The etch rate was found to be proportional to the fluorine concentration and independent of the bias for the higher gas flow rates. However, at lower flow rates, the situation was more complicated and no simple model can explain the measurements. Measurements of the etch rate were also made in the afterglow of a repetitively pulsed discharge so that the directed ion energy would be reduced to the thermal motion after the rapid collapse of the plasma potential. A simple model was developed to explain the temporal etching phenomena in terms of the lifetime of the atomic fluorine. (C) 2003 American Vacuum Society.