Study of the influence of the cutting parameters on the chip geometry during machining alloy UNS A97075

被引：2
|
作者：
Sanchez, Y. [1 ]
Trujillo, F. J. [1 ]
Sevilla, L. [1 ]
Marcos, M. [2 ]
机构：
[1] Univ Malaga, Dept Mfg Engn, Dr Ortiz Gomez S-N, E-29071 Malaga, Spain
[2] Univ Cadiz, Fac Engn, Mech Engn & Ind Design Dept, E-11519 Cadiz, Spain
来源：
MESIC MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2015 | 2015年 / 132卷
关键词：
Turning process; Cutting parameters; Chip morphology; UNS A97075; ALUMINUM-ALLOYS;
D O I：
10.1016/j.proeng.2015.12.527
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper aims to discuss machining cutting with zinc base aluminum alloys for aircraft applications (UNS A97075) through research and development activities, as well as experiments based on the turning process with specific machining conditions cutting speed, feed rate and cutting depth. In addition, some macro scale studies were performed on the tool life as well as experimental measuring using stereoscopic optical microscopy (SOM) techniques on the chip. The relation between influence cutting parameters on the chip geometry during machining can be used to determine the optimal cutting conditions for other processes. (C) 2016 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：513 / 520
页数：8
相关论文
共 50 条
  • [41] Multi-objective integrated optimization of tool geometry angles and cutting parameters for machining time and energy consumption in NC milling
    Zhao, Junhua
    Li, Li
    Nie, Hua
    Chen, Xingzheng
    Liu, Jiwei
    Shu, Xin
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2021, 117 (5-6): : 1427 - 1444
  • [42] Study of Parameters during Aluminum Cutting with Finite Element Method
    Batorfi, Anos Gyorgy
    Ando, Matyas
    PERIODICA POLYTECHNICA-MECHANICAL ENGINEERING, 2020, 64 (02): : 136 - 144
  • [43] Multi-objective integrated optimization of tool geometry angles and cutting parameters for machining time and energy consumption in NC milling
    Junhua Zhao
    Li Li
    Hua Nie
    Xingzheng Chen
    Jiwei Liu
    Xin Shu
    The International Journal of Advanced Manufacturing Technology, 2021, 117 : 1427 - 1444
  • [44] Study of Chip Morphology and Chip Formation Mechanism During Machining of Magnesium-Based Metal Matrix Composites
    Davis, Brian
    Dabrow, David
    Ju, Licheng
    Li, Anhai
    Xu, Chengying
    Huang, Yong
    JOURNAL OF MANUFACTURING SCIENCE AND ENGINEERING-TRANSACTIONS OF THE ASME, 2017, 139 (09):
  • [45] Influence of Cutting Parameters on Characteristics of Serrated Chip When High-Efficiency Cutting Ti6Al4V
    Yang, Shucai
    Zheng, Minli
    Zhang, Deqiang
    Liu, Ning
    Fan, Yihang
    APPLICATION OF DIAMOND AND RELATED MATERIALS, 2011, 175 : 278 - 283
  • [46] Effect of cutting parameters on the depth of subsurface deformed layers of single γ-TiAl alloy during nano-cutting process
    Li, Junye
    Sun, Yuxiao
    Xie, Hongcai
    Zhao, Weihong
    Xu, Chengyu
    Liu, Jianhe
    APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, 2022, 128 (03):
  • [47] Study on Chip Morphology and Adiabatic Shear in High Speed Cutting of Alloy Steels with Different Hardness
    Duan, Chunzheng
    Li, Honghua
    Wang, Minjie
    Cai, Yujun
    ADVANCED MECHANICAL ENGINEERING, PTS 1 AND 2, 2010, 26-28 : 875 - +
  • [48] Effect of cutting parameters on the depth of subsurface deformed layers of single γ-TiAl alloy during nano-cutting process
    Junye Li
    Yuxiao Sun
    Hongcai Xie
    Weihong Zhao
    Chengyu Xu
    Jianhe Liu
    Applied Physics A, 2022, 128
  • [49] Influence of cutting parameters on PCD tool wear during milling tungsten carbide
    Li, Hao
    Zhao, Wei
    Gao, Xutao
    Shi, Weiqi
    He, Ning
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2024, 130 (1-2): : 985 - 993
  • [50] Influence of cutting parameters on PCD tool wear during milling tungsten carbide
    Hao Li
    Wei Zhao
    Xutao Gao
    Weiqi Shi
    Ning He
    The International Journal of Advanced Manufacturing Technology, 2024, 130 : 1165 - 1180
12345