Study of the influence of the cutting parameters on the chip geometry during machining alloy UNS A97075

被引：2
|
作者：
Sanchez, Y. [1 ]
Trujillo, F. J. [1 ]
Sevilla, L. [1 ]
Marcos, M. [2 ]
机构：
[1] Univ Malaga, Dept Mfg Engn, Dr Ortiz Gomez S-N, E-29071 Malaga, Spain
[2] Univ Cadiz, Fac Engn, Mech Engn & Ind Design Dept, E-11519 Cadiz, Spain
来源：
MESIC MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2015 | 2015年 / 132卷
关键词：
Turning process; Cutting parameters; Chip morphology; UNS A97075; ALUMINUM-ALLOYS;
D O I：
10.1016/j.proeng.2015.12.527
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper aims to discuss machining cutting with zinc base aluminum alloys for aircraft applications (UNS A97075) through research and development activities, as well as experiments based on the turning process with specific machining conditions cutting speed, feed rate and cutting depth. In addition, some macro scale studies were performed on the tool life as well as experimental measuring using stereoscopic optical microscopy (SOM) techniques on the chip. The relation between influence cutting parameters on the chip geometry during machining can be used to determine the optimal cutting conditions for other processes. (C) 2016 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：513 / 520
页数：8
相关论文
共 50 条
  • [31] Effects of nano-cutting fluids on tool performance and chip morphology during machining Inconel 718
    H. Hegab
    U. Umer
    M. Soliman
    H A. Kishawy
    The International Journal of Advanced Manufacturing Technology, 2018, 96 : 3449 - 3458
  • [32] Effects of nano-cutting fluids on tool performance and chip morphology during machining Inconel 718
    Hegab, H.
    Umer, U.
    Soliman, M.
    Kishawy, H. A.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2018, 96 (9-12): : 3449 - 3458
  • [33] Influence of the machining parameters on workpiece roundness error during turning operations
    Nunez, P. J.
    Simao, J.
    Rubio, E. M.
    Rincon, J. L.
    ADVANCES IN MATERIALS PROCESSING TECHNOLOGIE, 2006, 526 : 127 - 132
  • [34] A Numerical Investigation and Experimental Validation on Chip Morphology of Aluminum Alloy 6061 during Orthogonal Machining
    Akram, Sohail
    Imran, Husain
    Khan, Mushtaq
    Mubashar, Aamir
    Warsi, Salman
    Riaz, Umair
    2ND INTERNATIONAL MERCON 2016 MORATUWA ENGINEERING RESEARCH CONFERENCE, 2016, : 331 - 336
  • [35] The effect of cutting parameters and tool geometry on machinability of cotton-fiber reinforced polymer composites: Cutting forces, burr formation, and chip morphology
    Kuzu, Ali Taner
    Bakkal, Mustafa
    JOURNAL OF INDUSTRIAL TEXTILES, 2016, 45 (06) : 1364 - 1382
  • [36] Investigation of the effects of machining parameters on cutting conditions during orthogonal turning of austenite stainless steel
    Konya, Gabor
    Takacs, Janos
    Miskolczi, Istvan
    Kovacs, Zsolt F.
    PRODUCTION ENGINEERING ARCHIVES, 2024, 30 (02) : 251 - 258
  • [37] Investigation of the effects of machining parameters on cutting conditions during orthogonal turning of austenite stainless steel
    Konya, Gabor
    Takacs, Janos
    Miskolczi, Istvan
    Kovacs, Zsolt F.
    PRODUCTION ENGINEERING ARCHIVES, 2024, 30 (01) : 86 - 93
  • [38] Experiment and numerical study of chip formation mechanism during cryogenic machining of Ti-6Al-4V alloy
    Wang, Yongqing
    Li, Jianming
    Liu, Kuo
    Jiang, Shaowei
    Zhao, Di
    Wang, Siqi
    Yang, Yuebing
    JOURNAL OF MANUFACTURING PROCESSES, 2022, 84 : 1246 - 1257
  • [39] Analysis of Face Milling of Hard Steel 55NiCrMoV7 by Studying Rough and Semi-Finished Machining and the Influence of Cutting Parameters on Macroscopic Chip Dimensions
    Malea, Claudiu Ionut
    Nitu, Eduard Laurentiu
    Iordache, Daniela Monica
    Tabacu, Stefan Lucian
    Negrea, Aurelian Denis
    Badulescu, Claudiu
    MATERIALS, 2024, 17 (14)
  • [40] Influence of cutting parameters on end milling of magnesium alloy AZ31B
    Gobivel, K.
    Sekar, K. S. Vijay
    MATERIALS TODAY-PROCEEDINGS, 2022, 62 : 933 - 937
12345