Study of the influence of the cutting parameters on the chip geometry during machining alloy UNS A97075

被引：2
|
作者：
Sanchez, Y. [1 ]
Trujillo, F. J. [1 ]
Sevilla, L. [1 ]
Marcos, M. [2 ]
机构：
[1] Univ Malaga, Dept Mfg Engn, Dr Ortiz Gomez S-N, E-29071 Malaga, Spain
[2] Univ Cadiz, Fac Engn, Mech Engn & Ind Design Dept, E-11519 Cadiz, Spain
来源：
MESIC MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2015 | 2015年 / 132卷
关键词：
Turning process; Cutting parameters; Chip morphology; UNS A97075; ALUMINUM-ALLOYS;
D O I：
10.1016/j.proeng.2015.12.527
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper aims to discuss machining cutting with zinc base aluminum alloys for aircraft applications (UNS A97075) through research and development activities, as well as experiments based on the turning process with specific machining conditions cutting speed, feed rate and cutting depth. In addition, some macro scale studies were performed on the tool life as well as experimental measuring using stereoscopic optical microscopy (SOM) techniques on the chip. The relation between influence cutting parameters on the chip geometry during machining can be used to determine the optimal cutting conditions for other processes. (C) 2016 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：513 / 520
页数：8
相关论文
共 50 条
  • [21] Influence of cutting parameters on surface roughness and strain hardening during milling NiTi shape memory alloy
    Guijie Wang
    Zhanqiang Liu
    Weimin Huang
    Bing Wang
    Jintao Niu
    The International Journal of Advanced Manufacturing Technology, 2019, 102 : 2211 - 2221
  • [22] Influence of cutting parameters on surface roughness and strain hardening during milling NiTi shape memory alloy
    Wang, Guijie
    Liu, Zhanqiang
    Huang, Weimin
    Wang, Bing
    Niu, Jintao
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2019, 102 (5-8): : 2211 - 2221
  • [23] Performance analysis of new external chip breaker for efficient machining of Inconel 718 and optimization of the cutting parameters
    Yilmaz, Bahattin
    Karabulut, Sener
    Gullu, Abdulkadir
    JOURNAL OF MANUFACTURING PROCESSES, 2018, 32 : 553 - 563
  • [24] A study of the combined effects of machining parameters on cutting force components during high speed robotic trimming of CFRPs
    Slamani, Mohamed
    Gauthier, Sebastien
    Chatelain, Jean-Francois
    MEASUREMENT, 2015, 59 : 268 - 283
  • [25] Numeric Simulation of Cutting Parameters' Influence on Tool Performance Induced by High Speed Machining
    Shang, G. Q.
    Sun, C. H.
    PROCEEDINGS OF THE SECOND INTERNATIONAL CONFERENCE ON MODELLING AND SIMULATION (ICMS2009), VOL 8, 2009, : 110 - 115
  • [26] The Influence of graphite, MOS2 and Blasocut lubricant on hole and chip geometry during peck drilling of aerospace alloy
    Reddy, A. V. Sandeep
    Kumar, S. Ajay
    Jagadesh, T.
    MATERIALS TODAY-PROCEEDINGS, 2020, 24 : 690 - 697
  • [27] Experimental study on the evolution of chip morphology, chip formation, and surface topography with cutting parameters, and their relationships in dry milling of cast aluminum alloy with PCD inserter
    Chen, Xuelin
    Tang, Jinyuan
    Ding, Han
    Liu, Anmin
    JOURNAL OF MECHANICAL SCIENCE AND TECHNOLOGY, 2021, 35 (04) : 1651 - 1662
  • [28] Analysis of ignition risk in intermittent turning of UNS M11917 magnesium alloy at low cutting speeds based on the chip morphology
    Carou, Diego
    Rubio, Eva M.
    Davim, J. P.
    PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 2015, 229 (02) : 365 - 371
  • [29] Experimental study on the evolution of chip morphology, chip formation, and surface topography with cutting parameters, and their relationships in dry milling of cast aluminum alloy with PCD inserter
    Xuelin Chen
    Jinyuan Tang
    Han Ding
    Anmin Liu
    Journal of Mechanical Science and Technology, 2021, 35 : 1651 - 1662
  • [30] Influence of Feed Rate Response (FRR) on Chip Formation in Micro and Macro Machining of Al Alloy
    Rahman, M. Azizur
    Bhuiyan, Md Shahnewaz
    Sharma, Sourav
    Kamal, Mohammad Saeed
    Imtiaz, M. M. Musabbir
    Alfaify, Abdullah
    Nguyen, Trung-Thanh
    Khanna, Navneet
    Sharma, Shubham
    Gupta, Munish Kumar
    Anwar, Saqib
    Mia, Mozammel
    METALS, 2021, 11 (01) : 1 - 21
12345