Study of the influence of the cutting parameters on the chip geometry during machining alloy UNS A97075

被引：2
|
作者：
Sanchez, Y. [1 ]
Trujillo, F. J. [1 ]
Sevilla, L. [1 ]
Marcos, M. [2 ]
机构：
[1] Univ Malaga, Dept Mfg Engn, Dr Ortiz Gomez S-N, E-29071 Malaga, Spain
[2] Univ Cadiz, Fac Engn, Mech Engn & Ind Design Dept, E-11519 Cadiz, Spain
来源：
MESIC MANUFACTURING ENGINEERING SOCIETY INTERNATIONAL CONFERENCE 2015 | 2015年 / 132卷
关键词：
Turning process; Cutting parameters; Chip morphology; UNS A97075; ALUMINUM-ALLOYS;
D O I：
10.1016/j.proeng.2015.12.527
中图分类号：
T [工业技术];
学科分类号：
08 ;
摘要：
This paper aims to discuss machining cutting with zinc base aluminum alloys for aircraft applications (UNS A97075) through research and development activities, as well as experiments based on the turning process with specific machining conditions cutting speed, feed rate and cutting depth. In addition, some macro scale studies were performed on the tool life as well as experimental measuring using stereoscopic optical microscopy (SOM) techniques on the chip. The relation between influence cutting parameters on the chip geometry during machining can be used to determine the optimal cutting conditions for other processes. (C) 2016 The Authors. Published by Elsevier Ltd.
引用
收藏
页码：513 / 520
页数：8
相关论文
共 50 条
  • [11] A study on the influence of cutting parameters on forces during machining the multiphase V-microalloyed steel
    V Sivaraman
    S Sankaran
    L Vijayaraghavan
    The International Journal of Advanced Manufacturing Technology, 2015, 79 : 1285 - 1292
  • [12] A study on the influence of cutting parameters on forces during machining the multiphase V-microalloyed steel
    Sivaraman, V.
    Sankaran, S.
    Vijayaraghavan, L.
    INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY, 2015, 79 (5-8): : 1285 - 1292
  • [13] Fuzzy Optimization of Cutting Parameters for Titanium Alloy's Machining
    Chen, Jianling
    Li, Jianfeng
    Sun, Jie
    2008 4TH INTERNATIONAL CONFERENCE ON WIRELESS COMMUNICATIONS, NETWORKING AND MOBILE COMPUTING, VOLS 1-31, 2008, : 10952 - 10955
  • [14] Study on the Influence of Cutting Parameters on Cutting Forces and Chip Shape of Austempered Ductile Iron (ADI)
    Wang, Chihong
    Guo, Xuhong
    Wang, Wei
    Dong, Qu
    IMETI 2010: 3RD INTERNATIONAL MULTI-CONFERENCE ON ENGINEERING AND TECHNOLOGICAL INNOVATION, VOL I, 2010, : 228 - 231
  • [15] Influence of cutting parameters on the chip-tool interface temperature during the turning of Waspaloy
    Isik, Yahya
    Kus, Abdil
    Cakir, M. Cemal
    MATERIALS TESTING, 2015, 57 (09) : 783 - 789
  • [16] Influence of Cutting Parameters and Tool Geometric Angles on TC4 Titanium Alloy Chip Shape
    Wu, Weihua
    Chen, Wenmin
    Wang, Xuehui
    Zhao, Can
    MECHATRONICS AND INTELLIGENT MATERIALS II, PTS 1-6, 2012, 490-495 : 3912 - 3915
  • [17] Influence of cutting insert (uncoated and coated carbide) on cutting force, tool-tip temperature, and chip morphology during dry machining of Inconel 825
    Behera, Gobinda Chandra
    Thrinadh, Jadam
    Datta, Saurav
    MATERIALS TODAY-PROCEEDINGS, 2021, 38 : 2664 - 2670
  • [18] A Study on the Effect of Machining Parameters in Turning of Lead Alloy
    Arefi, Gazi Anzum
    Das, Ratnakar
    Sahoo, A. K.
    Routara, B. C.
    Nanda, B. K.
    MATERIALS TODAY-PROCEEDINGS, 2017, 4 (08) : 7562 - 7572
  • [19] INFLUENCE OF MACHINING PARAMETERS AND TOOL GEOMETRY ON TOOL WEAR DURING COBALT CHROMIUM-MOLYBDENUM MICRO DRILLING
    Patar, Mohd Affifudin Abdul
    Suhaimi, Mohd Azlan
    Sharif, Safian
    Mohruni, Amrifan S.
    Hisam, Muhammad Juzaili
    Shaharum, Mohd Sallehuddin
    JURNAL TEKNOLOGI-SCIENCES & ENGINEERING, 2024, 86 (02): : 101 - 114
  • [20] INFLUENCE OF MACHINING PARAMETERS AND TOOL GEOMETRY ON TOOL WEAR DURING COBALT CHROMIUM-MOLYBDENUM MICRO DRILLING
    Patar, Mohd Affifudin Abdul
    Suhaimi, Mohd Azlan
    Sharif, Safian
    Mohruni, Amrifan S.
    Hisam, Muhammad Juzaili
    Shaharum, Mohd Sallehuddin
    JOURNAL OF THE KOREAN SOCIETY OF RADIOLOGY, 2024, 86 (02): : 101 - 114
12345